Features of Shanghai Rongyi New Mini Mosfet Inverter DC Plasma Cutter With Buit-in Compressor 40A CUT40C:1. MOSFET inverter and precision constant current feedback control technology, soft switch, DC output, 100 kHz of inverter frequency;
2. Wide working voltage range, strong adaptability to electricity power grid, high ability of interference resistance, automatic voltage compensation, stable cutting current and steady arc;
3. Compact structure, portable, energy saving, easy for maintenance;
4. For CUT40 and CUT50, we also can provide 110/220v duel automatic input voltage shift, for CUT60, we can also provide both single phase 220v and three phase 380v input voltage;
5. Intensive arc, high cutting speed, narrow and smooth kerf, continuous current regulation, little distortion for work-piece, safety and reliable for operation;
6. Applicable to automatic cutting equipment;
7. Suitable for carbon steel, stainless steel, aluminium, copper, etc.
8. Complete accessories: air cooling cutting torch, earth clamp with cable, compressed air regulator, etc.
9. "C" means COMPRESSOR, this model with buit-in compressor, so it is very easy and convenient both for family and industry use.
| Accessories: | - Plasma Cutting Torch
- Plasma Consumable installed on the torch
- Air Filter/Regulator and fitting kits
- Ground Clamp & Cable
- Connections (like Air Hose and hose clamps)
- User Manual (in English
|
Parameters of Shanghai Rongyi New Mini Mosfet Inverter DC Plasma Cutter With Buit-in Compressor 40A CUT40C:
Model Spec. | CUT40C | CUT50C |
Power supply voltage | 220+15% V / 50~60 Hz |
Power frequency | 50~60 Hz | 50~60 Hz |
Power supply capacity | 4.8 kVA | 6.3 kVA |
Rated input current | 22 A | 28 A |
No-load voltage | 230 V | 230 V |
Output current range | 20-40 A | 20-50 A |
Output voltage range | 88-96 V | 88-100 V |
Duty cycle | 60% | 60% |
Efficiency | 85% | 85% |
Tip hole diameter | 1.0 mm | 1.0 mm |
Arc striking model | Touch / Untouch/ Non-HF | Touch / Untouch/ Non-HF |
Cosφ (η) | 0.93 | 0.93 |
Air pressure | 0.4MPa | 0.4MPa |
Cutting thickness | Steel | 1-8mm | 1-10mm |
| Aluminium | 1-6 mm | 1-7 mm |
| Copper | 1-4 mm | 1-5 mm |
Air flow | 110 L/min | 120 L/min |
Insulation grade | B | B |
Protection grade | IP 21S | IP 21S |
Net Weight | 9.2 kg | 14.7 kg |
Dimensions (mm) | 450*300*300 | 450*300*300 |
High Quality Cutting Torch SG-55 with the machine
Perfect Design Connectors on the front panel
Two Special Design fans on the back of machine
Very Small Size & High Quality Paint
Nice Filter of the built-in compressor
Strict Quality Control
The production process for RONGYI products is among the most stringent in the world and meets or exceeds some of the industry's most rigid standards. Our studies show that it is in fact among one of the best in the industry and is unrivaled by other would-be competitors. The quality of each of the integrated components is constantly monitored during the course of production. Only components and materials that meet the highest industry standards for quality are permitted to be incorporated into RONGYI products. Finally, upon conclusion of production, each unit is put through a newly devised, far more rigorous 30 point testing and quality inspection routine. This process is critical to ensuring a product that is not only safe, but reliable in both performance and durability.
Cut at 12 Times the Speed of Sound
Plasma cutting is a process that is used to cut steel and other metals using a plasma torch. In this process, an inert gas (compressed air) is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface that is being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut. The plasma, which is maintained between the work-piece and electrode, travels at over 9000 MILES PER HOUR (15,000 km/Handle). That’s over twelve times the speed of sound.
Advantage of Plasma vs. Oxy-Fuel Torch
Plasma does not use expensive, hazardous gases, only compressed air. It imparts much less heat into the piece being cut, eliminating warping. It does not require ignition. It leaves little to no slag to clean up or grind off. The cost per cutting hour can be less than oxy-fuel since there is no gas cost. It is also much quicker and easier. So, you cut better, faster and inexpensively.
Skill and Training
There is not a lot of skill or training required to operate a plasma cutter. The torch should remain at a 90-degree angle. With the CUT-40C you can keep a standoff or drag the tip of the torch on the metal.
Rongyi Buildings
Products and Package
Our Certifications
Some PCBs
Accessories