Sawdust briquette making machine/Sawdust making machine/sawdust briquetting press machine /biomass briquette machine

2013 Sawdust briquette making machine/Sawdust making machine/sawdust briquetting press machine /biomass briquette machine

1, Raw material:
sawdust, wood chips, branches, crop stalks, sugarcane residue, coffee husk, paddy straw, sunflower stalk, cotton stalks, bamboo dust, palm husk, soybeans husk, tea waste, etc.

2, Features of briquette making machine:
Making briquette is fast(the briquette is 60cm/20s), Large extrusion density, propeller with special wear-resistant materials, precision casting, life was over ten times more rapid than conventional.
Forming the sleeve with a specially formulated alloy casting, life span of a year. This sophisticated technique not only lowers the cost greatly but also saves manpower.

3, Application of briquette making machine

As the need of pollution free environment, the product has a large scope of marketing. The briquettes can be used as a substitute of any fuel in following fields:
a, Boilers:It can be used in the boilers of Paper Mills, Sugar Mills, Dyeing houses, leather, lamination industries, Vanaspati units,
b, Food ProcessingUnits, Oil Extraction Units, Solvent Extraction Plant and many other plants and industries.
c, Furnace&Foundries:It can be used for metal heating & melting (where melting point is less than 1000d/cel.)
d, Brick Kilns:It is the total, substitute of steam coal.
e, Residential&Commercial Heating:For winter heating in Cold areas and Hotels, Canteens, Cafeterias and house hold kitchen appliances etc.

4, Finished product:

This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.

The available shape: square, hexagonal, pentagon, pentagon with edge, hexagon with edge

The available diameter could be: 50mm,55mm.60mm,65mm.70mm.80mm and so on

The available length could be: 20cm,30cm, 40cm, 50cm

The feature of the final product : Specific gravity: 1300—1900kg/m Calorific value: 4500—5000kcal/kg

5, Technical parameters of briquette making machine:

6, The process of making briquette:

Generally speaking, charcoal briquette making flowchart is as follows:
Raw material-crushing-drying-briquette making-carbonizing

1) Just as referred, there are a wide range of raw materials including agroforestry wastes such as sawdust, crop straw, wood branches, rice hull,bamboo sawdust,peanut shell and sunflower shell,etc.

2) Crusher is suitable for crushing different kinds of straw or wood log with size less than 200mm(diameter). After milled, the output diameter is 3-5mm, which is suitable for further briquetting.

3) For raw materials with high moisture content of above 12%, a drier is necessary to install. Put the wet material into the hopper. The stove(boiler) generates hot air which mixed with wet sawdust and sucked into the pipes by the exhaust blower(fan), the dried sawdust is discharged from the outlet with air lock.

Finishing this step, we need make sure that the processed materials diameter must be at 3-5 mm and the raw materials moisture is within 8-12%.

4) Making briquette is a process that biomass is compressed under high pressure and high temperature. We need no binder added as the lignin in plant can serve as the glue in briquetting process. After binding and compressing, the biomass is pressed into high density briquette.

5) The last step is carbonization. This process makes the wood briquette into charcoal briquette which is popular among BBQ lovers. Our furnace is of rational structure and only needs small heat consumption. The carbonized charcoal briquettes are high qualified and have longer burning time.