Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Drilling Machines

Special purpose machine for brass faucets drilling and tapping. - details see: https://www.machineto.com/rzt-6-s-3-way-6-spindles-lift-type-drilling-tapping-facing-machine-for-facuet-10125250

RZT-6-S 3 way 6 spindles lift type drilling and tapping machine (The right spindle unit can be rotate.)

Special purpose machine forbrass faucetsdrilling and tapping.

Features description

• For 1 / 2 "~ 2" G thread brass Y- faucets, pipes drilling and tapping.
• The right spindle unit(the third, sixth spindle)adds manual slide,that can be rotate to meet the proessing need of different angles faucets.
• The machine is able to complete machining the valve in 3 directions with a cycle, save machining time and reduce the labor cost.
• It’s controlled by PLC (programmable logic controller), stable and easy to repair.
• The machine is obtained Chinese national patens.

Parameter

Item		Parameter
Model		RZT-6-S 3 Way 6 spindle lift type drilling & tapping machine (The right spindle unit can be rotated)
Capability		¼”~1” G-Pipe thread brass Y type brass valve.
Number of spindle		6 Spindles
Processing material		Brass
Production efficiency		¼”~1”20~40s/pcs
Spindle speed	Drilling spindle	1400 rpm
	Tapping spindle*	680 rpm*
Travel	Drilling spindle	≤110mm
	Tapping spindle	≤60mm
Control systerm		PLC (Programmable Logic Contorller)
Hydraulic pressure		1.5~3.5MPa
Motor drive mode	Drilling motor	Contactor
	Tapping motor	Contactor or inverter (AC drive)
Motor power	Drilling motor	3KW/4P×3
	Tapping motor	2.2KW/6P×3
	Hydraulic pump motor	3KW/4P×1
Power supply		3 Phase AC 380V/50HZ
Total Power		13~20Kw
Dimension		2100mm×2300mm×2100mm
Weight		3800kg
If the tapping motor drived by the inverter, the speed range of the tapping spindle is 200 ~ 800rpm.

The following photos are our customer using RZT-6machine tool to process the 3way copper valve.