Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Other Machine Tools Accessories

1. WE OFFER CNC HIGH SPEED CENTER, DEAD CENTER,, 2. LIVE CENTER, REVOLVING CENTER - details see: https://www.machineto.com/revolving-center-high-speed-center-live-centers-10155703

1. SLOW SPEED CENTER ( Plain Point )-Model - MTC - 101

---

MODEL	AVAILABLE IN TAPER SIZES
EXTRA LIGHT DUTY	MT-1, 2 & 3
(Double Bearing)	(Plain Point only)
STANDARD	MT-1, 2, 3, 4, 5 & 6
(Heavy Duty Triple Bearing)	(Plain, Carbide Tipped, Female,Extended, HSS Tipped Points)
EXTRA HEAVY DUTY	MT-3, 4, 5 & 6
(Four Bearings)	(Plain, Carbide Tipped andExtended Points)
SUPER EXTRA HEAVY DUTY	MT-4, 5, 6 & 7
(Four & Five Bearings)	(Plain & Carbide Tipped Points)
JUMBO HEAVY DUTY	MT-5 & 6
	(Plain Point only)
Application : For Conventional Slow Speed Lathes All Centers are sealed for entry of coolant and swarf / chips by special sealing arrangement. Each center provided with an inspection report covering all critical parameters like run out, correctness of Morse Taper angle etc. Precision Ground. Maximum radial run out within 0.015mm. Closer run outs can also be provided against request. TRUMAX offers India's largest range of Live centers to suit specific needs. Body made alloy steel case hardened and tempered to a hardness of 32 - 40 HRc approx. Point made from bearing steel and hardened to 60 HRc approx. for maximum wear resistance. Live Centers broadly confirm to IS 3793 - 1966 Ask for Catalogue 1A for Technical Specifications & Details.

2. REVOLVING CENTER ( CARBIDE TIPPED POINT )

Model - No. MTC - 102

Capable of withstanding very high rpm at high loads.

Suitable for CNC and other high speed turning centers.

Bearing used are of FAG GERMANY make.

Bearing lubricated for life using imported KLUBER make ISOFLEX NBU-15 Grease.

Imported German Seals used for protecting bearing from dirt and coolant.

Copy Turning centers are not recommeded and should be used only for medium speed and very low load applications.

For higher speeds than sp

3. PIPE CENTER - (Model - No - MTC - 103)

Standard Size
	Blunt type	:	25-50, 30-65, 40-75, 50-90, 65-100, 75-125, 75-150, 100-175, 100-200, 100-230mm.
	Available Tapers	:	MT–2, MT – 3, MT – 4, MT – 5, MT – 6, MT–7.
	Pointed type	:	0-2", 0-2 ½", 0-3", 0-3 ½", 0-4", 0-5"
	Application	:	In turning / grinding of pipes and tubes which cannot be held by ordinary Revolving Centers because of small point diameters of Revolving Centers.

04. DEAD CENTER - (Model No. MTC - 104)

Made from Bearing Steel EN-31 and hardened to 60 HRc.

Confirms to IS : 2289 – 1976 (Equivalent to DIN 806 -1961 / ISO – 298)

Precision Ground. Tip run out within 0.015mm max.