Home  >  Chemical Process Machinery  >  Separation Equipment

Centrifuge Equipment, 1.CE, 2.Model PDSD6000-B1317Z, 2.Capacity 6000L/h, 4.removing water and mechanical impurities - details see: https://www.machineto.com/pdsd6000-b1317z-automatic-oil-separator-centrifuge-equipment-10302653

PDSD6000 Automatic Oil Separator Centrifuge Equipment

Brief introduction of Centrifuge Equipment

Model PDSD6000-B1317Z separator Centrifuge Equipment is mainly used to remove water and

mechanicalimpuritiesfrom diesel oil, lubricating oil and other mineral oil in marine diesel engine

unit and land used diesel generator unit of power station so as to reduce wear of the diesel engine

and other machine,and prolong engine life. The model is also used to separate two unsolvable liquids with

different specific gravity or remove small amount of solid particle from liquid.

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption,

convenient operation and economic maintenance cost.

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically

and fully.

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can

run for long time with low vibration, safety and security.

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.

Principles of Centrifuge Equipment

1. Suitable for high viscosity (380 CST /50), high density (~ 1010 kg/m3/15°C) oil
2. Master the technology of no-gravity ring automatically adjusting the oil water interface for the first time in China after alfalaval and westfalia.

1—— Input 2——Purified Oil 3——Light phase gauge

4——pressure sensor (Purified Oil) 5——moisture sensor 6——pressure sensor (heavy phase)

7——circulatory solenoid valve 8——draining solenoid valve 13——Sewage

Advantages of Centrifuge Equipment

1. The piston type slag removal and self cleaning automatically discharging
2. belt drive(No second tensioning required)
3. Full hydraulic discharge structure, quicker Respond and slag discharge more thoroughly
4. Internally installed with three sets of programs applied to the Separation of HFO, LO and DO
5. Automatically detection of water sealed water and slag discharge time
6. “No-gravity ring” automatically adjusts “oil water interface”
7. Suitable for the separation of high viscosity(380cSt/50°C)and high density(1010Kg/m3 ) HFO

Main Technical Specification of Centrifuge Equipment

Discharging type		Partial discharge
Max capacity		L/h	6000
Output pressure of clear oil		Mpa	≤0.2Mpa
Motor power		kw	7.5 (380V/50Hz/3P)
N.W.		kg	620
Dimension		(L × W × H) mm	1049 × 729 × 1090

Condition for mineral oil separation and actual capacity (refer to the chart)

oil types	fuel oil							lubrication oil
	fuel oil		heavy fuel oil					SAE30,40	detergence oil		steam turbine oil
kinematical viscosity(mm2/s)	1.9-5.5	5.5-24	120	180			380	100-120			61.2-74.8
	40°C		50°C					40°C			40°C
density/(kg/m3)(20°C)	less than 900		900-991					880-900			less than 900
separating temperature (°C)	normal temperature,40-60best		90-98					80-95
recommended capcity (l/h)	6500	6000	4500		4000	3000		2000-3500		2000-3500	4000-5000

Reserve the right to change specifications without prior notification.

Auto Control System of Centrifuge Equipment

Water Control:Automatic control unlocking water, sealing water and water-seal/water switching.

Pneumatic Control:Filter and adjust compressed air, control heavy phase pneumatic valve and three-way changeover pneumatic valve.

Temperature Control:Automatic control the temperature of the oil line, also control separately or withelectric control cabinet at the same time.

Buzzer Control:Monitor oil temperature, pressure, over loading, non-discharging and leaking, and Offer a group of passive contactor stretching out to control panel.

System Drawing of Centrifuge Equipment

The Whole Unit Consists of
1. Separator 2.Oil feed pump 3.Electric control box 4.Steam heater 5.Temperature adjusting valve
6.Steam trap 7.Safety valve 8. Pressure switch 9.Oil filter 10.Pressure gauge
11.Vacuum gauge 12.Temperature sensor 13.2/2 Solenoid valve 14. 2/3 Solenoid valve
15.Air reduction pressure valve 16. Pneumatic three-way valve 17.Stop-check valve
18.Brass filter ball valve 19. Water pressure reducing valve 20.Ball valve 21.Skid

More pictures of Centrifuge Equipment

Packing details of Centrifuge Equipment

Peony Centrifuge has been dedicated to producing machinery and equipments and carrying

out facility construction, pursuing the best quality and producing the best product at the

same time. We are committed to reward you with a better quality in return for our interest

in and faith toward. We will do our utmost for one more stepping forward, based on our

infinite services and trust to customers.