Home  >  Packaging Machinery  >  Filling Machines

304Stainless steel, forming by CNC machining center , meet the GMP requirement.Complete disassembly, cleaning no residue. - details see: https://www.machineto.com/newly-semi-automatic-capsule-filling-machine-10055972

Semi-Automatic Filling Machine

CGN-208C Technical details:

Change/Debug mold time	5-8minute(tyro)
Production rate	1-2.5 ten thousand grain/hour(determined by capsule number )
Applicable capsule	00#,0#,1#,2#,3#,4#,5#mechanism standard capsules
Filler type	without sticky hygroscopic powders, granules
Total power	2.12kw
Air pressure	0.03m3/min 0.7Mpa
Vacuum pump	extraction rate40m3/h
Equipment Dimension (L×W×H)	1.2×0.7×1.65 m3
Equipment Dimension (L×W×H)	1.8×0.8×1.75 m3
Weight of whole machine	400kg(include box)

New capsule plate compared with old

	material	disassemble	installation	Defect capsule
Old type	Copper welding Molding ,Rough dead ends, does not meet the GMP requirements	Not removable, not thorough cleaned	No localization apparatus, installation manual adjustment	Need to stop manually resolved ,the more cumbersome
New type	304Stainless steel, forming by CNC machining center , meet the GMP requirement	Complete disassembly, cleaning no residue	localization apparatus, can be easily repeated removal and installation, no need to adjust	Perspective window helps detect early, can be solved without downtime, convenient and easy

Old style New style

The strewing capsule overall installation effect picture

Old type	New type
Most of the old-fashioned mechanical moving parts exposed on the outside, easily to cause oil powder dust, the mold have no positioning device which needs more complicated adjustments; the overall visual effect is poor.	The new mechanical moving parts are all wrapped up in strew capsule board and no bare, mould adopt locating device which installation and disassembly cleaning are very convenient. The appearance is practical, beautiful and neat.

New Type Strewing capsule Old Type Strewing Capsule

New Correction block compared with old

	Material	Installation
old type	Cast copper by ordinary milling molding, which does not meet the GMP requirements	No localization apparatus, manual adjustment
New type	304 stainless steel by precision wire cutting molding Silk Road gas polishing, meet the GMP requirements	Have localization apparatus, can be easily repeated removal and installation, no need to adjust

New Style Old Style

Capsule Feeder

	material	Installation	Operation
Old type	Cast aluminum by ordinary milling molding, does not meet the GMP requirements	Long slot adjustable	Only push Capsule movement
New type	304stainless steel precision wire cutting molding the Silk Road polishing, meet the GMP requirements	Long slot adjustable	At the same time push the capsule and capsules U-turn operation

New Style Old Style

Unloading Capsule

Old type	New type
Old style device is no u-turn through the horizontal direction. It should press the capsule to come true turn around. Capsule should take oblique line into upper and low die. But it would affect the efficiency.	New style capsules device by the horizontal U-turn after pressure capsule head down vertical movement, capsules showing a single row of vertically aligned in the downward movement of the vertical deviation smooth entry into the upper and lower mold holes to improve the probability capsules

Old Style New Style