most technology rice bran oil machinery

most advanced technology rice bran oil machinery manufacturer

1.The extractor is driven by gear rack.

2.Unique balancing rotor is designed to ensure less power consumption, less maintenance cost and no noise

3.Rotation speed of shutter and host machine can be adjusted automatically according to incoming oilseed quantity to ensure that the bin level is stable.

4.This will do good to form micro negative-pressure in the extractor and reduce the leakage.
5.Process of miscella circulation is improved to reduce the solvent use, solvent residue in meal and increase the miscella concentration.

6. Energy is saved through reducing the evaporation quantity.

7.Rotor extractor is very popular to many kinds of pre-pressed cake.

8.Rotating cell designed at the high bin level makes it easy to form immersion-extraction and thus reduce the meal fines content in miscella.

9.All this done will do good to improving the crude oil quality and reducing scaling in evaporation system.

10.Rotor Extraction is suitable for various oilseed extraction.

1. Introduction

(1) Function: Leaching system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

(2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials.

(3) Main parts: The extraction series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping

tower, condenser, etc.

2. Main parts

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor

(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).

(3). DTDC: usd to separate the solvent from the wet meal.

(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water

to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate,

reaching the goal of purifying.

(5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to

condenser for recycling.

(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Main Process

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted

by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes

to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in

the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the

stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary

extraction.

4 . Advantages

(1) High oil yield , obvious economic benefit .

(2) Residual oil rate in the dry meal .

(3) Improving the quality of the meal .

(4) Low processing cost , high labor productivity.

5.Professional Advice

Please kindly inform us your required daily capacity, treated quantity, raw material, covering space and related data,

so that we can make flow chart production line for you as your requirement. we will stand at your point to suggest

low cost and suitable production line for you. Sincerely want to cooperate with you.