Home  >  Other Machinery  >  Other Machinery & Industry Equipment

Mix cording machine, 1-Independent motor Driver, 2-Good quality sequin device, 3-New Model Tension base, 4-Reasonable Price - details see: https://www.machineto.com/mix-cording-machine-10359934

Main Feature:
SINSIM 3 in 1 mixed machine has additional feature besides flat and sequins’:

1. All types of embroidering: taping: taping 1 , taping 2 and frill embroidering; Zig-zag: Z1~Z6;
2. Embroidery can be different by adjusting the range of oscillation;
3. Combined embroidering: flat, sequin, Z1~Z6, taping, coiling and frill embroidering;
4. Adjusting the coiling density automatically: Coiling can be divided into left coiling and right coiling according to different core thread being used. The coiling density is adjustable by changing coiling rate.
5. Function of coiling tracking: it enables the coiling head to track that the density if coiling seldom is not average in different angle and the tensions of upper threads are not the same. Due to this function, the quality of coiling enters a new lever;
6. Automatic Speed control could be accommodated in different embroidery way according to the pin mark, like flat embroidery could reach max 850 rpm, tapping, zigzag, cording embroidery could reach max 600 rpm, and coiling embroidery could reach 500 rpm.
7. Embroidery type could be adjusted by your order. Flat and coiling embroidery could be changed by manual or automatic operation. Embroidery type could be selected by the operation panel. Combination of embroidery type is various and acceptable by accessory addition.
8. Coiling embroidery can be worked independently, off line or lack of tapping material are easily to cope with. Put off the switch of the head, than the tapping advices could be separate from the main drive. Work efficiency could be improved greatly.
9. Zigzag device: zigzag embroidery device is dominated by independent motor drive. Amplitude of swing can be adjusted freely between 4-10 mm. Different needle length and speed settings could be adjusted according to the embroidery situation. To ensure high quality embroidery, 1-6 mm Embroidery area could be used.

10. Automatically install the data of coiling and zigzag embroidery: adjust the needle space according to embroidery material on the operation panel. On the base of flat embroidery, six kinds of zigzag needle mark could realize.

11. Manual or automatic presser foot elevate function are also adapted, that convenient to change embroidery frame and cloth. Product is artistic and stable.

Main configuration:

1.Dahao electric system, 322 5 inch monitor (without trimmer)/328 ( with trimmer),And you can choose top grade computer like C18/C88/366 Computer.

2.Main motor :Dahao servo , Panasonic Servo ,Fuji Servo ,Sanyo Servo available.

3.X/Y Driver: All servo or Stepping Motor available.

4.Origian Japanese Rotary Hook

5.New style Liner driver

6.Automatic trimmer device( Adapting)

7.Needles: 3/4 /6/9/12/15Needles ,Heads: 1-56 Heads, Embroidery Space: X /150-1100mm,Y/300-1200mm.

Accessories Included

1-Table Support and Washer of machine foot

2-Exploded View of Machine

3-Operation Manual

4-Tool Kit.

5-Automatic Bobbin Winding Machine

6-Air Compressor (If Need)

Specification

Model	Heads	Head interval	Needles	Embroidery Space	Machine size
SINSIM-TA604	4	400	6	400 X 680-1200	2900 X 1810
SINSIM-TA606	6	400	6	400 X 680-1200	3700 X 1810
SINSIM-TA608	8	400	6	400 X 680-1200	4500 X 1810
SINSIM-TA610	10	400	6	400 X 680-1200	5300 X 1810
SINSIM-TA612	12	300	6	300 X 680-1200	4900 X 1810
SINSIM-TA615	15	300	6	300 X 680-1200	5800 X 1810
SINSIM-TA618	18	300	6	300 X 680-1200	6700 X 1810
SINSIM-TA620	20	300	6	300 X 680-1200	7300 X 1810
SINSIM-TA904	4	400	9	400 X 680-1200	2900 X 1810
SINSIM-TA906	6	400	9	400 X 680-1200	3700 X 1810
SINSIM-TA908	8	400	9	400 X 680-1200	4500 X 1810
SINSIM-TA910	10	400	9	400 X 680-1200	5300 X 1810
SINSIM-TA912	12	300	9	300 X 680-1200	4900 X 1810
SINSIM-TA915	15	300	6	300 X 680-1200	5800 X 1810
SINSIM-TA918	18	300	9	300 X 680-1200	6700 X 1810

[Example of model code]
SINSIM-TA(a), 9(b), 20(c)

a=Model Name

b=Needles

c= Heads