Milka-Ware Variable Speed Milk Pump Controller

Here is a variable speed system to rival any other. Please contact us for more information on the system if required.

Basically, the Variable speed controller will convert single phase power at point of input to three phase power on output. This will allow you to run 2 x 3-phase milk pump motors up to 1.1kw each. Other benefits include:

1) True variable speed calculations, not just running at a set level for a particular milk level.
2) If one pump ever dies, this system will control the other to allow you to keep milking.
3) Three Phase equipment is cheaper and requires less maintenance.
4) You will save on your power consumption.

FEATURES

* Very Accurate

* True Variable control (not just preset levels)

* Power friendly

* You can use cheaper 3-Phase Motors with 1-Phase input. These motors are also more reliable.

* Option of 2.2KW for double pump or 0.750kw system for single pump.

* The system ramps up the first pump by software driven logic based on milk can measurement. Once the first pump is running full and capacity is exceeded, the system caclulates an appropriate level for 2 pumps to run at, then turns on the second pump. It then runs both pumps together at a lower speed and ramps them up and down together. When able to do so, the system will return to only one pump.

* Washing and milking mode

* Milk can level probe included

Milka-Ware Australia

ACN 115 444 052

20 Commercial Drive,

Dandenong, Vic. 3175.