Descriptions of automatic coating production line:
MG series new type automatic coating production lineis based on the latest design concept in Europe, this production line adopts the advanced computer PLC auto-control system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration.
MGDM-3.7new type automatic coating production line
Main confirguation of automatic coating production line:
1, Storage system
2, Metering and batching system
3, Conveying system
4, Mixing system
5, Air compressor system
6, Packaging system
7, Dedusting system
Wroking principle of automatic coating production line :
According to requirements of the customers, the system can be equipped with 3-6 bulk storage bins, the material in which will, after being processed by the metering and batching system, be conveyed to pending-for-mixing bin, and then fed into the high-efficiency biaxial agravic mixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed.
Moreover, there is design with automatic rationing and packaging machine at the bottom of finished products bin, allowing for synchronous auto-packaging operation. Featured with easy and convenient operation, high efficiency, it can both obviously reduce labor intensity and effectively reduce dust pollution.
Features of automatic coating production line:
1. It features magnificent appearance, good quality, high productivity and accurate mortar proportioning.
2. The dry mix mortar production line uses a centralized control system, making the equipment easy to operate.
3.According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area. The needed area is 500~5000m2.
4. We can provide one-stop service from design to installation according to our customers’ specific requirement.
Application of automatic coating production line :
Auotmatic masonry moratr manufacturing plant can manufacture the following various mortars:
1) Masonry mortar
2) Thin and smooth wall mortar
3) Hand-plastering screeding mortar
4) Colored coating mortar
5) Water-proof mortar
6) Plaster powder
7) Wall plastering mortar
8) Ceramic tile adhesive mortar
9) Self-leveling mortar
10) Heat-preservation mortar.
11) Gap filler
12) Repair mortar
Technical parameters of automatic coating production line:
| Model | Out put | Occupied area | Equipment height | Batching and packaging |
| Simple type | 3-4t/h | 20m2 | 3-4m | Manual batching Automatic packaging |
| Semi-automatic type | 5-8t/h | 50-60m2 | 6-7m | Manual batching Automatic packaging |
| Full automatic type | 8-30t/h | 60-65m2 | 7-8m | Automatic batching Automatic packaging |
Main configuration of automatic coating production line :
Several types of products:
Components and parts of automatic coating production line:
automatic coating production line export:
...