Manufacture manual FGF plastic tubes filling and sealing machine
Condition:New | Application:Chemical | Packaging Type:Bottles | Packaging Material:Plastic hose |
Automatic Grade:Semi-Automatic | Driven Type:Pneumatic | Power:1.1KW | Place of Origin:Jiangsu China (Mainland) |
Brand Name:DKS | Model Number:SGF-40 | Usage:Pharamaceutical cosmetic food and chemical | Type:Multi-Function Packaging Machine,Filling Machine |
Function:Filling,Sealing |
This machine is used mainly to fill liquid material with fixed quantity into plastic tube and seal the tail.
Process:It sets measuring ,filling,inside heating,sealing tail,launching hose in whole process.
It is installed a hopper to contain material ,also can be connect with material distributing machine.
The operator inserts hose into the hole of workbench.
The workbench automatically revolve by mechanical transmission ,the photoelectric detection system sense the empty hose and if there is any tube in right position.
Workbench goes on revolving ,fill quantitative material.
thermoforming inside of the hose
Go on revolving ,add outside thermoforming aseal the tail.
Cut the redundant part
Then eject the hose.
Feature:Unique filling structure,no dropping of material.
Dual thermoforming inside and outside ,no material leaking from the tail of hose.
In the filling process pneumatic device drive the hose up and down to match up the filling, ensure lower bubble
in the hose.
Suitable for filling of plastic laminated tube of any type.
The tube-holding base can be easily replaced.
Voltage | according to your country |
Filling Speed | 20-30tube/min |
Filling volume | 3-30 5-75 30-200ml |
Quantity error | < 2% |
Work temp | 5-50°C |
Compressed air: pressure | 0.6~0.7Mpa |
Volume | ≥0.6M3/min |
power of motor | 400W*2 |
Pressure nitrogen gas:pressure | 0.2~0.4Mpa |
Dimension | 1230×700×1400(mm) |
Weight | 230kg |
Packaging Detail:Standard wooden carton |
Delivery Detail:30-40days after prepayment |