Home  >  Packaging Machinery  >  Multi-Function Packaging Machines

1.Adopt for liquid material, 2.fill fixed quantity or volume, 3.Easy to operate, 4.Many creative designs, 5.ISO90001:2008 - details see: https://www.machineto.com/manufacture-fgf-thermoforming-tubes-filling-and-sealing-machine-10059634

This machine is used mainly to fill liquid material with fixed quantity into plastic tube and seal the tail.

Process:It sets measuring ,filling,inside heating,sealing tail,launching hose in whole process.

It is installed a hopper to contain material ,also can be connect with material distributing machine.

The operator inserts hose into the hole of workbench.

The workbench automatically revolve by mechanical transmission ,the photoelectric detection system sense the empty hose and if there is any tube in right position.

Workbench goes on revolving ,fill quantitative material.

thermoforming inside of the hose

Go on revolving ,add outside thermoforming aseal the tail.

Cut the redundant part

Then eject the hose.

Feature:Unique filling structure,no dropping of material.

Dual thermoforming inside and outside ,no material leaking from the tail of hose.

In the filling process pneumatic device drive the hose up and down to match up the filling, ensure lower bubble

in the hose.

Suitable for filling of plastic laminated tube of any type.

The tube-holding base can be easily replaced.

Voltage	according to your country
Filling Speed	20-30tube/min
Filling volume	3-30 5-75 30-200ml
Quantity error	< 2%
Work temp	5-50°C
Compressed air: pressure	0.6~0.7Mpa
Volume	≥0.6M3/min
power of motor	400W*2
Pressure nitrogen gas:pressure	0.2~0.4Mpa
Dimension	1230×700×1400(mm)
Weight	230kg