Magnetic powder clutch for

Magnetic powder clutch PCO

Magnetic powder clutch & brake operation principle:

When no current flows in the magnetic coil, powder is being attached to input drum side by centrifugal force as separate input drum and output drum. So the torque is not transmitted. If coil is exited by electric current, magnetic flux is generated, and then torque is transmitted by the friction between powder and working side.

Magnetic particle clutch|brake features:

1) Excitation current and transmitting torque are almost in proportion, also transmitting torque is controlled with wide ranges.

2) Regardless of slipped rmp, torque is excellently transmitted.

3) Torque by residual flux is very little and stopping stability is excellent.

4) It can operate with slipping state, for large capacity cooling with heat.

5) Take short repair time as it is dry-type, so can use it for long time without any adjustment.

6) It is friction clutch of based on the powder.

For printing machine,

For Lamination & coating machines,

For Slitting machine,

For Wires & Cable machine, Wire cut machines,

For Paper, Plastic Films, Foils, Wires, Cables converting machines,