Low cost eco-friendly from battery scrap recycling lead production line

Battery pollution enviromment.

Battery scrap recycle lead working principle:

The battery recycling equipment, first cutting the battery, and then apply the principle of gravity separation of the inside of the metal and nonmetal.

Battery recycling plant is based on the advanced and reasonable mechanism process

that can separate the LEAD from lead battery. The final output product of this process is lead without any plastic inside .

This process is an eco-friendly method instead of some polluted way that is

based on burning and chemical processing.

Recycling steps

Step1.Use battery auto cutter cutting the battery into two part, make the acid liquid flow out.

Step2. Use intelligent crusher to crush the lead plate of lead battery into 1-2cm, crushed lead plate go to granulator by conveyor.

Step3. Use granulator with 45kw motor to cut the battery into 1-4mm granule. crushed battery are mixed with water becoming slurry.

Step4. Slurry goes to feeding silo via feeding slot.

Step5.The light material will float at the surface of water and go to deposit pool via spill way chute, the output from water pool is lead power.

Step6. The heavy material will sink at the bottom of the feeding silo and then go to vibrating screen through spiral chute

Step7. Vibrating screen will classify the material by size and output lead granule.

The water will be circulated and reused.

Our recovery rate for our solution is 99.7% by gravity wet separation way.