Large Capacity Vibrating Ore Feeder from China

Large Capacity Vibrating Ore Feeder from China

Introductionto Vibrating Feeder

Vibrating feederis also namedVibratory feeder. TheChinavibrating feedercan send the massive and granular materials to the receiving device equably from the storage to protect the port of the crusher from being blocked. Thefeed grizzlycan feed material uniformly in the sand product line. The vibratory feeder with the exciter of the double eccentric shaft ensures that the equipment can bear the impacting force produced by the falling big materials.Vibrating Feeder is a kind of linear direction feeding equipment. It features smooth vibrating, reliable operation, long service life and being suitable for feeding. They are widely used in mining, building-material, silicate and chemical industry in the crushing and screening plants.

Featuresof Vibrating Feeder

1) Steady vibrating, reliable working and long life.

2) Adjustable vibrating.The flow rate can be changed and controlled at any time, which makes the adjusting convenient and steady.

3) Little noise and low energy consumption.

4) Simple structure, light weight and small size.

5) Easy to maintain.

6) Able to protect the machine from dust pollution when using the enclosed structure.

Working Principleof Vibrating Feeder

When the vibrating grizzly feeder is working, the engine makes the eccentric block of the vibration exciter through the V-belt. The running eccentric stimulates the screen box to make some degree of circular motion with strong centrifugal force. The materials on the slant screen make constant throwing motion with the impacting from the screen box. During the process, some particles smaller than the sieve pit will go down the sieve. Thus, the classifying can be realized.

Maintenanceof Ore Vibrating Feeder

1) The feeder uses the thin oil splashing to lubricate. The lubricating oil should depend on the place and temperature, and usually the gear oil is used.

2) The height of the thin oil in the vibration exciter should be higher than the height of oil leveler. The thin oil must be updated every 3 to 6 months.The oil box, ball track and the appearance of the gears should be cleaned by clean oil before changing oil.

3) The operators should receive education on the safety techniques.

4) When the machine is working, no one is allowed to stand by it or touch, adjust, clean and repair it.

Technical Parametersof Vibrating Feeder