Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Casting Machinery

Jolt Squeeze Molding Machine, 1.high efficiency & large productivity, 2.CE,ISO9001 and ISO14001, 3.OEM - details see: https://www.machineto.com/jolt-squeeze-molding-machine-10160392

Jolt Squeeze Molding Machine

The Jolt Squeeze Molding Machineis suitable for batch production of single sided pattern plate and single flask moulding of small castings,can make cope flask and drag flask.

The Jolt Squeeze Molding Machineown simple air control system,easy operation,flexible use and convenient repair and maintenance.

The Jolt Squeeze Molding Machine Special Features

• The Jolt Squeeze Molding MachineNoise Controlled
• The Jolt Squeeze Molding MachineCombined Jolt Squeeze
• The Jolt Squeeze Molding MachineAccurate Centreline Draw
• The Jolt Squeeze Molding MachineVariable Jolt Timers
• The Jolt Squeeze Molding MachineOperational Roller on Pin Lift Draw
• The Jolt Squeeze Molding MachineOperational Safety Guards

The Jolt Squeeze Molding Machine Work principle

The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. The Jolt Squeeze Molding Machine made of sand mold are good quality, the basic requirement is also lower.

The Jolt Squeeze Molding Machine Work Technical Parameters

Item	Unit	Z144
Max dimension of flask	mm	500×400×180
Worktable dimension	mm	560×465
Air pressure	Mpa	0.6
Compressive strength	KN	42
Jolting load	KN	2.6
Compacting stroke	mm	120
Draw stroke	mm	150
Distance between worktable to pressure head	mm	170-190
Productivity	Mould/h	40-60

*Jolt capacity and static squeeze pressure calculated at 90 PSI

Static squeeze pressure increase by approximately 100% during simultaneous jolt squeezes.