Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

our products are of good quality and competitive price.We can design and manufacture it according to the requirments. - details see: https://www.machineto.com/internal-mixer-10340024

Type	X(S)M-50		X(S)M-75/40	X(S)M-160		X(S)M-250/20		X(S)M-270
	AC Drive	DC Drive		AC Drive	DC Drive			AC Drive	DC Drive
Net Chamber Volume(L)	50		75	160 142 (2 wings) (4 wings)		250		270
Working Volume(L)	35		50	120 105 (2 wings) (4 wings)		140		188 (4 wings)
Rotating Speed of Drive Rotor(r/min)	40	5-50	40	30	4--40	20		20/40	4-40
Rotating Speed Ratio of Rotors	1 1.16		1 1.18	1 1.15		1 1.16		1 1.11
Ram Pressure on Stocks (Mpa)	0.25-0.32		0.26-0.35	0.36-0.48		0.16-0.21		0.35-0.47
Compressed Air Pressure(MPa)	0.6-0.8		0.6-0.8	0.6-0.8		0.6-0.8		0.6-0.8
Air Consumption(m3/h)	15		40	70		40		298
Max. Steam Pressure (MPa)	0.8		0.8	0.8		0.8		0.8
Cooling Water Pressure (MPa)	0.3-0.4		0.3-0.4	0.3-0.4		0.3-0.4		0.3-0.4
Water Consumption (m3/h)	15		20	45		25		50
Discharging Device	Hydraulic Drop Door
Power (KW)	110	132	160/155	355	520	250		500/1000	1250
Reducer	NGM Planetary Hardened-gear Speed Reducer							Dual-output Hardened-gear Speed Reducer
Overall Dimension (mm)	6100x1600x3610		6830x1930x3800	8900x2800x5050		7600x2500x4000	8540x4000x5560
Weight (Kg)	10500		15000	31000		26000		50000		49000
Note	All the models may be optionally equipped with either pneumatic or hydraulic ram.

USAGE:

The machine is applicable for plasticating and mixing rubber and plastics.

STRUCTURAL FEATURES:
The internal mixers of this adopt elliptical tangential rotors. The wings and working surfaces of the rotors, the internal surfaces of the mixing chamber, and the working surfaces of the pressing ram device and the discharging device are all coated on with wearable hard alloy by built-up welding method,which are durable and corrosion proof and have a long service life.

The rotors, the mixing chamber and the discharging door are all structured with circulating channels to realize the circulation of heat transmission mediums. According to different processing requirements, the mixing materials may be heated by hot steam or cooled by cold water.

The mixing chamber is a combined configuration, which is convenient for assembling, disassembling and maintaining. The drop-door discharge device is driven by two reciprocating oil cylinder which directly pull the locking plate to lock the discharge door. The device provides fast discharging and reliable airproof.
The rotors are supported by rolling bearings, which are easy to maitain and have a long service life.
The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.
The