Home  >  Industrial Supplies  >  Energy Saving Equipment

bio boiler in home appliance, 1.low operating cost, 2.pollution-free, 3.stable quality,long service life, 4.auto - details see: https://www.machineto.com/industrial-sawdust-biomass-wood-pellets-burner-bio-boiler-in-home-appliance-10213953

industrial sawdust biomass wood pellets burner/bio boiler in home appliance

Multi-fuel options: burn various biomass raw materials or molded biomass particles ( Wheat straw, rice straw, corn stalks, corn cobs, peanut shells, cotton stalks and etc. of the crop, as well as branches, leaves, bark, roots, wood chips, bamboo powder, sawdust and other leftovers of forest products, which are cheap and inexhaustible).

Features of industrial sawdust biomass wood pellets burner/bio boiler in home appliance

1. Low operating cost

The wood chip pellet fuel used is renewable resource with extensive source and low cost. Its operation cost is only 40% as high as the cost of the diesel oil, 50% as the heavy oil, and 30% as the natural gas.

2. Non-pollution, remarkble environmental benefits

Adopting the half gasification high temperature combustion mode to make the fuel burning sufficient (wood tar is also in gaseous until the combustion is over), with no black smoke production and wood tar emission. The national generalized green renewable biomass wood pellet fuel is used, so that SO2 emission is almost zero, dust emission concentration is lless than 50 mg/m3, blackness is less than ling mann I level, and all the indexes meet environmental protection standard of the national first class area. Futhermore, it can achive completely dust free emission after the dust treatment of the equipment used, and is the most environmental combustion equipment.

3. High thermal efficiency , strong output

Our combustion machine adopts boiling half gasification combustion and tangent spiral-flow type air distribution design, to make the biomass fuel convert and burn sufficiently, and the thermal efficiency can reach 90%. Besides, there are larger than 60 mm refractory insulating material in the gasification chamber, to make the heat of the gasification chamber not easy to spread out, greatly improving the thermal efficiency of the combustion engine .

4. Safety and stable

Water shortage, over temperature etc multiple protection, unique isolation device, and correct using won't cause the danger of tempering. Good effect of heat preservation make the appearance temperature of the the biomass combustion engine gasification chamber close to the room temperature, without the risk of scald.

5. Stable quality, long service life

The inner tank of the gasification chamber is made by unique high temperature resistant heat insulation material, with high temperature oxidation resistance characteristics and stable physical characteristics, and that its service life is five times as long as the commen refractory material.

6. High degree of automation,more advanced,more convenient

Adopting automatic feeding, coupled with our own full-automatic control panel makes the biomass combustion engine realize one key button operation, with full-automatic operation of blowing (blowing off ashes on the fire grate), feeding, size fire conversion and shutdown. So the operation is just simple and convenient.

7. High heating temperature

The flame of the combustion engine is stable, and the high temperature period can reach 1300 degrees.

8. Unique appearance design

The overall design is neat and beautiful, and has special maintenance door, so that maintenance is convenient.

Wide use : widely used in boiler, die-casting machine, industrial furnaces, kitchen

equipment, drying equipment, and other heating equipment. Especially used in 0.2-4T

oil, coal or wood boiler of energy saving transformation.

Technical parameter:

Power	calarific value Kcal/h	heating aera	feeding motor	blower	igniter	outlet calibre	fuel consumption	dimention	package dimention	Weight
		m2				mm	kg/h	mm	mm	kg
260kw	25×104	2500	220w	60w	370w	140	55	1500*700*1450	1560*760*1500	300
350kw	30×104	3000		90w	550w	165	80	1600*800*1550	1660*860*1600	350
600kw	60×104	5000	380w	90w	1.1kw	219	140	1700*800*1650	1760*860*1700	450
900kw	90×104	8000		180w	1.5kw	300	200	1800*900*1750	1860*960*1800	600
1200kw	120×104	10000		180w	3kw	370	280	1800*900*1950	1860*960*2000	800

Technical parameter of boiler:

Model	Power(mW)	heating aera/m2	biomaterial consumption/KG
			(H average)
DHS-A	0.015	150	3
DHS-A	0.02	200	5
DHS-A	0.03	300	6
DHS-A	0.04	450	7
DHS-A	0.06	600	12
DHS-A	0.08	700	16
DHS-A	0.12	1000	20
DHS-A	0.18	1500	35