In situ sterilizable Fermentor SDP 50L~100L

Fermentor SDP 50L~100L

The FermentorSDP(50L~100L) is the pilot-scale fermentation system and which can be used for microbial, insect and mammalian cell culture procedures. The stainless steel (SUS 316L) vessel and the whole attachments can be sterilized automatically or manually in this pilot scale fermentation system and the whole fermentation process can be also performed automatically. Fermentor SDP (50L~100L) is able to install head lifting system. The head plate is lifted by air cylinder and guided by the two sets of linear motion guide.

• Fed-batch culture support pH Stat, DO Stat
• Color LCD Integrated Microprocessor Controller system
• Validation support documentation available(IQ,OQ)
• Data Saving
• Fermentor system represents the ideal intermediate step for scaling up.
• Automatic control of DO, pH, temperature, agitation, and nutrient feed for fermentation process.
• All processing parameter are controlled by integrated microprocessor controller.
• Automate or Manual sterilization in place by external steam supply or optional steam generator.
• The modular design consists of the supply unit the culture vessel and the control cabinet.
• The open frame design of the supply unit provides ready access and ease of maintenance and operation.
• The sterilization procedures are programmable and can be modified by users
• Accessories for cell culture applications are available upon request.

Control System

• The integrated controller board is adopted to measure, control and display the fermentation system.
• Color LCD displays the whole status of the system in graphic mode.
• The measured data and control parameters can be not only saved and transmitted to the computer in Excel format but also printed out by thermal printer in real time state.
• Easy to connect with the various systems such as memory stick, printer, computer with the RS-232C communication protocol.

Vessel

• Water jacket system is adopted for precise temperature control.
• 6~8 toggle bolts make it easy to assemble and dissemble the head plate.
• Sight glass makes to monitor the status of the media.
• Spare ports are installed on the head plate that the auxiliary sensor can be installed.
• Sensor ports are installed in the circumferential direction on the lower side of the vessel

Specification

Vessel Selection