HYDRAULIC CEMENTING TOE LASTING MACHINE

Feature

Before the lasting, there is no need beforehand cement between the toe upper and the middle of sole. Not only save much manpower, but also it will never un-glued after the toe upper closely attached to the last, keep it perfect.

After the lasting, all-around forming bands and particular wipers are guarantee the toe upper uniform attached with the last, absolute not crease, increase the beautiful and improve the quality.

The 9 independent pincers can be individually adjusted to cope with the lasting of any shape of shoe toes .The automatic balance device and the theory of automatic de-cementing on wipers' advancing are the very key points for upgrading the quality and raising the production capacity.

Adjustable auxiliary wiper:

Auxiliary wiper is coordinated with the nine pincers which can prolong the length of lasting down to the middle of sole where is the more closely attached to the last. The structure of supplemental wipers is essential for making perfect shoes especially when a side and heel lasting machine will follow for one time forming.

Adjustable cement applicator

Generally, the cement applicator on an automatic toe cementing &lasting machine is usually fixed and un-adjustable. Ours is different and can be adjusted. The structure of being adjustable quite fits the production of different shoes mixing on the same production line. Without any tools, the applicator can be easily and soon adjusted to have an appropriate cementing position for different size of shoe, which will produce a perfect cementing effect and save changing applicator for making different size of same style of shoes.

The wipers are functioned with inching movement and speed adjustment, which makes the whole adjustment of lasting control more convenient.

The machine is equipped with cross projector assembly, which is convenient for correcting toe lasting and helps new comers to easily operate the machine.

The rapid installing and releasing structure for pincers can finish the whole process within 30 seconds.

The height of the last support plate is remotely controlled. There is a numerical instruction provided for reference which makes the operation easier and more efficient.

The pressure and speed for each mechanism are adjusted and the pressure gage is also installed at the outside of the machine which makes the operation and adjustment more conveniently.

Speedy adjustment of pincers fixed plate

The pincers fixed plate adopts the double-tracking structure. It is independently adjusted on the right and left. The rotary point of pincers fixed plate located at the joint between the first and second pincers. The curve in between will not be changed when the groups of right and left pincers are adjusted, which will make the uppers more attached to the lasts.

Specifications