Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mining Thickener

Thickener, 1.Simple structure, 2. Easy adjustment, 3. Reliable operation and easy maintenance, 4.Less power consumption - details see: https://www.machineto.com/hot-selling-high-quality-thickener-with-central-transmission-for-mineral-processing-10318260

Yantai Jinpeng Mining Machinery CO., LTD

Professional mineral processing design, equipment production,installation and conmissioning institue.

Tel: 0086-535-3975297

Hot selling high quality thickener with central transmission for mineral processing

The central drive thickener mainly used in the process of concentrate and tailings’ dehydration, meanwhile it can also be used for dehydration, desliming, and sewage treatment in hydrogenated industry and coal separation plant.

1.Dump bucket 2.Overflow tank 3.Vertical axis 4.Rake 5.Drive Components 6.Lifting Components 7.tank 8 .Feeding parts

In the bottom center of a discharge concentration of the product discharge bucket, pond surrounding the upper ring with the overflow tank. Concentrated in the central pool has a vertical axis, the axis of the cross at the end of a fixed frame rake, rake the following aircraft equipped with a scraper. Rake into a horizontal plane and 8 ° -15 °. Fixed by the vertical axis in the truss on the motor reducer by the middle gear driven rotary. When the vertical axis rotation, the pulp along the truss to the mine shafts into the center of the bowl pool, and to concentrate around the pool flows. Pulp in the settlement of solid particles gradually condensed into the bottom of the pool by the following scraper plane rake scraping into the center of the pool discharge bucket with sand pump. To clarify the aboveclarificationwater from the Department of the Central Bank out of the overflow tank. In the thickener have been concentrated load or materials, the discharge will fight blockage and rake frame distortion. To prevent this phenomenon, there are signals of safety devices and equipment to upgrade rake frame.

(1)Deaeration cell is provided to avoid bobble on which solid particles may attach and settls as “parachute phenomena”.

(2)The mineral feeding pipe is beneath the liquid surface to provent air to be brought in by feeding.

(3)Inner overflow weir is equipped to let slurry flow on pre-designed route, avoiding “short circuit”.

(4)The pattern of the overflow weir is made into indented shape, eliminating suction phenomena in some part of draining induced by unleveled overflow weir.

Diameter of concentrated tank		mm	3600
Central depth		mm	1800
Filter area		m2	10.2
Capacity		t/24h	5-224
Rakespeed		r/min	0.38
Model			Y90L-6
Power		KW	1.1
Rotation speed		r/min	910
Reduction Box	Model		WXJ-120-31-Ⅰ
	Speed ratio		31
Cylindrical gear		Speed ratio	1:1.5
Worm gear		Speed ratio	1:52
Rake lifting height		mm	350

Usually used in the following similiar process of gold,silver,copper, lead zinc, molybdenum and so on.

1. Installment:

Thickener installed on the site as a whole, the assembly of parts when the movement should be flexible to ensure a reliable rotation.

Spindle installed, when the rake to keep fighting and mine-line platoon.

Note: The thickener can not be reversed to run.

2. Trial Run

No-load trial run: testing time for 8 hours, turning part of the motor and heating should not exceed 50 °C.

Load testing: testing time for 8 hours, testing with liquid water.

3. Running

Thickener running before starting gate check, the lower part of the pool and the catheter is the normal transmission mechanism, and must be confirmed in the accident did not fall into the pool of goods before they can start when condensed machine.

Concentrated in the machine running, attention should be concentrated load of the plane, the overflow of purity and concentration of condensed products.

row bucket of the mine to plug the machine is running thick in one of the most important failure may occur due to blockage of the coarse-grained, wood chips, such as falling into the hands of rag concentrated in thickener, in particular the suspension of operation of the sand are more likely to occur. When thethroat stuck, it is important to close the pipeline of products concentrated on the gate, and then high-pressure water into the mine row bucket, so to eliminate the phenomenon of congestion. If the thickener from falling into the pool of wood, rags and other objects, completely rule out the possibility for failure, should be fully equipped to discharge pulp, in the clean-up.

Speed up the load after the operation in time for fastening a bolt for fastening.

Method of Lubrication:

1. Reducer used in HJ-40 (or J-50) oil and check regularly added.

2. Lubrication points each and the remaining 24 hours a butter added.

Provide ore dressing experiment,process design and onsite engineering service.

Welcome to visit our lab, design institute and factory!