Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Sand Washer

sand stone separating and washing machine, 1.loss reduction, 2.water saving, 3.high durablility, 4.ISO CCC - details see: https://www.machineto.com/hot-sand-stone-separating-and-washing-machine-with-novel-design-10320896

Hot! Sand Stone Separating and Washing Machine with Novel Design

Application

Sand washing machine is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factories quartz sand and refilling pressure sand.

Working Principle
1.The electric motor runs slowly with the impeller after decelerated by the belt, decelerator and gears wheel.

2.The sand and stone flow into washing launder from feeding launder, rolls with the impeller, and grinds each other.

3.The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished.

4.The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder.

5.On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impeller to finish the washing task.

Advantage

Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.

Main Technical parameters

Model	Wheel Size (mm)	Max Feeing Size (mm)	Capacity (t/h)	Motor Power (kw)	Weight (t)	Overall Dimension (mm)
XSD2610	φ2600×1000	10	20-50	5.5	2.7	3255×1982×2690
XSD2816	φ2800×1600	10	30-60	11	3	3540×3000×2880
XSD3016	φ3000×1600	10	50-100	15	3.3	3845×3000×3080

Pictures: