Home  >  Printing Machinery  >  Post-Press Equipment

1.hot&cold laminating, 2.bottom factory price, 3.high quality,low laminating cost, 4.convenient to operate, 5.fast delivery - details see: https://www.machineto.com/hot-laminating-machine-for-single-piece-clm1300-h1-10072254

Hot laminating Machine for single piece CLM1300-H1laminator machine,hot stamping machine,hot&cold laminating for printed picture

(CHUNLEI BANNER MACHINE FACTORY)

1.Application:

Hot laminating machine is used to laminate a piece of protected film onto the printed picture to prevent from the humidity and sunshine, in order to keep the picture fresh.And there are two models of laminating machine we could supply them to you, cold and hot laminating machine. And now the indoor inkjet printer made the printing width of about 1.52m,so our laminating machine could meet to cover and stamp a film demands suitable.

2.Machine configuration:

&60W adjustable deceleration moment motor

& Diameter 130mm anti-glue silicon bottom roll

&Balanced adjustable press wheel on single side

&Turning aluminium alloy working plat

&The automatic rolling up system of finished picture

&Disconnected infrared measurement temperature system

&Diameter 130mm imported anti-high temperature silicon up roll

&Anti-wrinkle and anti-deviation feed film structure (Our right)

&Inching floor push On/Off

3.Feature:

&Indoor inkjet printed picture, outdoor car sticker paper, sticker paper onto glass furniture and porcelain board, etc

&The adjustable press system of the pressing film roller, it could keep the paper smooth not to be wrinkled. It would laminate film well no matter than the thinner film

&Up and bottom silicon rubber roller are all anti-heat imported, it is also anti-glue, and good flexible, long time usage life

&Adjustable tighten system for the feeding film, improve the expanding of the laminating film, in order to keep the smooth of the printer picture when laminating.

&With rurning up working plat, it would be very convenient for care and maintenance. And this design could save more room for you.

&With disconnected infrared control temperature system, so the temperature would be controlled more précised. And this design could improve the usage life

4. Technical parameter:

The maxi. Laminating Width of film(mm) 1520mm	The elevated style of warm roller Elevated linked on single side	The rated input consumption 2200w
The maxi. Laminating Thickness(mm) 25mm	Heat style of rubber roller Infrared inner heat	The rated input power voltage 110/220v
Laminating Speed 0-8m/min	Preheat time of rubber roller 10-15min	Machine net weight 210kg
The range of temperature 20-120°C	The power consumption of working 0.8-1kw/h	Machine dimensions 2080x 680x1180mm