Home  >  Raw Material Processing Machinery  >  Plastic Raw Material Machinery  >  Plastic Mixer

It is mainly applied for mixing, coloring and drying PVC material and various of resin, such as PE, PP, etc.. - details see: https://www.machineto.com/high-speed-mixer-super-mixer-10338251

It adopts pole-change motor (4P-6P) to control speed to achieve low-speed feeding material and high-speed mixing. The mixing process is auto-controlled by temperature or time, or by both. Discharge automatically and pneumatically when process finished.

• The jacket of the barrel is made of stainless steel and being buffed to be extremely burnished to enhance the blending effect.
• The out layer of the mixing chamber is made of the boiler steel and it has passed the water pressure 0.6Mpa experiment.
• Up and down ailerons are adopted and it had gone through dynamic and static balancing test to eliminate the vibrations.

Main Technical Specification:

Model No.	Barrel Capacity	Barrel Size	Spinning Speed of Main Shaft	Main Motor	Voltage
HSM300	300L	φ710mm x 760mm H	854/427 RPM	75/55KW x 4P/8P	380V x 50Hz
HSM400	400L	Æ950mm x 710mm H	750/375 RPM	90/60KW x 4P/8P	380V x 50Hz
HSM500	500L	Æ1000mm x 660mmH	750/375 RPM	110/75kw x 4P/8P	380V x 50Hz
HSM600	600L	Æ1000mm x 780mm H	750/375 RPM	110/75KW- 4P/8P	380V x 50Hz
HSM800	800L	Æ1000mm x 1020mm H	750/375 RPM	160/110kw x 4/8P	380V x 50Hz

Design according to the specifications of an individual purchaser is available as well.