Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Lift Tables

Hydraulic Lift of equipment, 1Load capacity:300-1000kg, 2Reduce woker duty, 3.improve production efficient - details see: https://www.machineto.com/high-quality-hydraulic-lift-mobile-scissor-hydraulic-elevator-10198293

High Quality Hydraulic Lift/Mobile Scissor Hydraulic Elevator

Alibaba China Hydraulic Lift OF Lifting Table Brief Introduction

1.Scissor hydraulic lift table is the professional high-altitude operation equipment.

2. Its scissor mechanical structure makes the lifting platform lift more stably.Wide working platform and large loading capacity can make the work scope bigger.It’s suiable for several pelople working together.

3.Lift height: 4m ,6m, 8m,10m ,11m and so on. And the max height of the scissor lift is 18m.

4.Loading capacity: 300kg,500kg,800kg,1000kg and so on.

Hydraulic Lift TableTechnical Parameter

Model	Capacity	Table Size	Max height	Work height	Total dimension	Net weight
SJY0.3-4	300Kg	1500*750mm	4m	5.7m	1700*900*1100mm	630kg
SJY0.3-6	300Kg	1500*750mm	6m	7.7m	1700*900*1300mm	760kg
SJY0.3-8(small)	300Kg	1650*750mm	8m	9.7m	1870*900*1410mm	880kg
SJY0.3-8(big)	300Kg	1800*1200mm	8m	9.7m	2300*1500*1420mm	1240kg
SJY0.5—8	500Kg	1800*1200mm	8m	9.7m	2300*1500*1450mm	1400kg
SJY0.8—8	800Kg	1800*1200mm	8m	9.7m	2300*1500*1540mm	1480kg
SJY0.3-9	300Kg	1800*1200mm	9m	10.7m	2300*1500*1500mm	1000kg
SJY0.5-9	500Kg	2000*1200mm	9m	10.7m	2500*1500*1550mm	1300kg
SJY0.3-10	300Kg	2120*l200mm	10m	11.7m	2600*1500*1550mm	1400kg
SJY0.5-10	500Kg	2120*l200mm	10m	11.7m	2600*1500*1550mm	1550kg
SJY1-10	1000Kg	2120*l500mm	10m	11.7m	2600*1950*1740mm	1930kg
SJY0.3-11	300Kg	2120*1500mm	11m	12.7m	2600*1800*l660mm	1630kg
SJY0.5-11	500Kg	2400*1500mm	11m	12.7m	2900*1800*1720mm	2040kg
SIY0.3-12	300Kg	2600*1500mm	12m	13.7m	3050*1950*1740mm	2170kg
SJY1-12	1000Kg	2600*1700mm	12m	13.7m	3120*l900*2000mm	3200kg
SJY0.3-14	300Kg	2950*1500mm	14m	15.7m	3450*1950*l950mm	2630kg
SJY0.3-16	300Kg	3500*l800mm	16m	17.7m	4010*2000*2000mm	4200kg
SJY0.3-18A	300Kg	3500*l800mm	18m	19.7m	4010*2000*2200mm	4550kg

Hydraulic Lift Table Alibaba China For Maintenance And Safety

1)In special circumstance, the machine will use explosion-proof electric equipment
2)The work table would equipped the guardrail to guarantee safety
3)The lift has hydraulic overload protective device to ensure equipment still work normally when the load is beyond rated load capacity
4)The machine is equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position.

5) First three months of operation,as with any new machine,minor fluid leaks may occur until the various hydraulic components and pipe fittings are fully seated.Correction of minor fluid leaks and general tightening of machine components during this initial period are not considered as reimbursable expenses under the limited warranty.

6)The hydraulic pump,cylinders and pressure valves are self-lubricating.

7)Shift service hydraulic system before checking the hydraulic fluid level,ensure that the scissors arms are stowed in the traveling position, and the machine is standing on level ground, Fluid level must be to full mark on the sight gauge,located on the side of tank.Refer to lubrication chart for correct grade of hydraulic fluid. Ensure that the filler cap is secure to prevent entry of water or other impurities into the tank.

8)Tire condition, check that the tires ar not damaged,

9)Platform rails and safety gate,check security of platform rails and safety gate.

10)Batteries,check battery electrolyte level and connections.

11)Steering,check the steering cylinder for fluid leakage.Inspect steering linkage for signs of wear.

12)Pivot pins,examine all pivot pins on scissors arms and cylinders to ensure that they are positively secured inposition.

13)Test all machine systems,test the operation of the drive assembly,including drive motor and steering.

14)Test the operation of the lift/lower functions.

15Test the operation the traversing deck funtion.

Hydraulic Lift Table Detail Shows and Introduction

This photo is the chassis of the hydraulic lifts,with the pneumatic rubbler tire,the lifting speed is 2m/s.

APPLICATION: Hydraulic lifts used two years for maintenance

picture for hydraulic arms, lift mechanism adopts high-duty steel rectangular tube,Q235 steel

the draft for the hydraulic lift

alibaba china form anson cranes

Certificate picture

Hydraulic Lifts Order Requirment:

please tell me:

1 lifting height

2 capacity
3 platform size