Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

1.heat resistant rubber conveyor belt, 2.highs strength,high capacity,high adhesion, 3.good through abality, 4.long life service - details see: https://www.machineto.com/heat-resistant-conveyor-belt-10197055

The heat-resisting conveyor belt is used for transporting high-temperature supplies,ore,hot coke,cement grod,hot casting,etc.such as fritting mainly.According to heat-resisting to bring damage even is it transport main behavior and different heat-resisting ranks of ability to lose,adopt three third second or butadiene styrene rubber cover the glue with separately; high strength and permeability of polyester canvas or duck make brute force layer. Cover the glue and can be complemented and set up the heat-resisting glass cloth among the skeleton layer, in order to improve and take service life heat-resisitingly.According to customer's enquiry,can make into the ring type bringing.

The heat-resisting physics mechanical performance that takes the overburden fater testing heat-resistingly accords with the regulation of the form:

Project		The type
		T1 1 type	T2 2 type	T3 3 type	T4 4 type
		Change the range
Hardness	Draw the intensity	+20	+20	±20	±20
	Maximum after wearing out	85
Draw the intensity	Performance rate of change	12	10	5	5
	The minimum value Mpa after wearing out	-25	-30	-40	-40
Break person who extend	Performance rate of change	-50	-50	-55	-55
	After aging rate of change	200	200	180	180

Characteristic:

Or include cotton amount high washing duck or the polyester canvas and glue of cover with certain heat-resisting performance to from by the textile canvas.

The advantage of the products and use:Cover the glue has certain heat-resisting performance,and is used for transporting the hot supplies in trades such as metallurgy, casting,coking,building materials,chemical industry,etc.or the blazing supplies ofg high temperature.

Carry out the standard:GB/T20021-2005 “heat-resisting conveyor belt”

Synthetic fabrics for use with a core, the zone of adhesion between the layers.

Units:N/mm

Index name	Among the cloth layer	Among overburden and cloth layer
Average of all samples	4.5	3.5
The complete test specimen lowest peak value is not smaller than	3.9	2.9

Used with natural fiber with a core made of fabric,the adhesive strength with the number of layers

Units:N/mm

Index name	Among the cloth layer	Among overburden and cloth layer
Average of all samples	3.2	2.7
The complete test specimen lowest peak value is not smaller than	2.7	2.2