Head lamp metallizing vacuum machine with

1. Head Lamp metallizing vacuum machine Application:It is applicable in decorative film in various plastic products, and glass. The aluminum-coated film is bright, delicate coating speed, high efficiency and simple operation, equipment stability.

We are able to supply customized vertical single-open and double-open or horizontal film coating machine according to the requirements of our customers.

Vacuum evaporation aluminum coating equipment main models and parameters

2. Chrome PVD coating machine Main Features:

1>This machine is equipped with a super big crucible electronic gun. In the entire evaporation process the film surface is flat and evaporation distribution is even.

2>This machine is equipped with a quartz crystal film thickness control instrument to control the film forming speed and metallization process automatically.

3>The overall structure is rationally designed to better satisfy the process requirements. The vacuum system is automatically controlled by PLC for convenient operation.

4>The vacuum operating system is protected with an interlock. The diffusion pump has water cutoff and phase loss alarm functions.

5>Touch screen and PLC automatic control are used to set parameters of main components of the entire machine, to monitor the running of this machine at real time, and to diagnose faults intelligently.

6>Control System: The vacuum is controlled by a 10.4 inches color touch screen coupled with a programmable logic controller. The vacuum and coating process are controlled fully automatically.

3. Reflector vacuum coating for auto parts Technical Parameters:

1> Vacuum chamber: ø1800mm×2000mm

2>Vacuum degree: (ultimate vacuum) 8×10 -4 Pa(clean vessel, idle load)

3.>Pumping speed: 5×10-2≤5min (clean vessel, idle load)

4>Evaporation power:380V/12V 25KW

5>Total power: 380V 50Hz 23KW (max. 45KW within short time)

6>Total water volume: 0.2Mpa 3m3/h

7>Total gas volume: 0.4-0.8Mpa

Samples showcase