Hand Push Pre-marker for Road Marking

Hand Push Pre-marker for Road Marking

Applications:
If pre-marking by vehicle before the road marking, the cost of the vehicle input is usually high. Also,
the marking work is often affected because of the pre-marker ’s not timely in place. TATU brand handpush
pre-marker can mark the pre-marking freely according to the requirements of construction and can
accomplish 1~4 lines independently, which greatly improves the construction efficiency.

Main Parameters:

Pre-marker equipment Equipped with two-wheels working arms
Pre-marker quantity 1-4 lines
Dimensions (L*W*H), Weight 1200×700×1300mm,(guide rod, water dispenser rod are not included) 100kg
Optional system Roll booster or sitting devices

Main Features:

1. The pre-marking device: Equipped with two working arms with road wheels, from which the premarking
width can be freely adjusted; it can mark 1~4 pre-markings according to the construction
requirements and the field conditions.
2. Chassis: A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistant
coating; equipped with imported high-speed bearing which ensures the whole machine ’running lighter
and more convenient.
3. Rubber wheel: The left and right wheels are gas-filled pressure resistant vacuum wheels, whose
diameters are"440mm; the directional wheel is special, natural modified, abrasion-resistant rubber
wheels, whose diameter is"190mm.
4. Directional device: The lockable single wheel ensures operating road marking machine in straight
line or turning freely.
5. Handle bar: Personalized design conforming to the requirements of the human body mechanics; the
height can be freely adjusted according to the operator ’s needs.
6. Guide rod: #an be freely adjusted to up, down, left or right.
7. Size & weight: 1445mm (L) ×700mm (W) ×1320mm (H).100Kg