Description of cyclone dust collector:
Cyclone Separator are ideal for separating dust with particle size greater than 5 um. Cyclone
Separator provides a very cost effective solution to the problems of dust collection, materials
and for conveying bark and chips.
Cyclone Separator unit basically consists of a cylindrical and a conical portion. As the dust
leaden air enters the inlet port, it spirals downwards in an outer vortex and comes out of the unit
in an inner vortex. It uses centrifugal force for the separation of particles. Centrifugal action causes
the air material to move around the inside walls of the cyclone, from where the material drops by
force of gravity at the bottom leaving the air to escape through the top.
Technical parameters:
| Model Number | air-entrance wind speed (M/S) | Air volume of Processing (m3/h) | Resistance (Pa) | Efficiency (%) | Total dimensions(mm) | Weight (kg) |
| CLK-150 | 10~20 | 210-420 | 100 | 95 | 380×1210 | 33 |
| CLK-200 | 370-735 | 466×1916 | 52 |
| CLK-250 | 595-1190 | 566×2039 | 75 |
| CLK-300 | 840-1680 | 631×2447 | 103 |
| CLK-350 | 1130-2270 | 716×2866 | 143 |
| CLK-400 | 1500-3000 | 808×3277 | 225 |
| CLK-450 | 1900-3800 | 893×3695 | 279 |
| CLK-500 | 2320-4650 | 983×4106 | 347 |
| CLK-600 | 3370-6750 | 1150×4934 | 612 |
| CLK-700 | 4600-9200 | 1325×5176 | 819 |
You can contac t me by the following ways: