Glass wool collecting machine

Introduction

The wool collector is used to collect the fiber blown out from the spinner and convey the original wool blanket (felt) onto the wool allocation conveyor. The flights of wool collector are made of stainless steel plateswhich will not rust after water washing. The air suction chamber located under the flights is composed of two sets of induced draft fan which generates negative pressure to draw fiber onto the flights.

Composition

Induced air system

The induced air system is consisted of bellows (air chamber), pipeline, chimney, fan etc. Two sets of bellows (air chamber) draw the fiber onto the flights with the negative pressure generated by the air fan.

Wool drying and blowing system

The wool drying system is used to dry the flights after washing by spraying system. The blowing system is also called wool lifting system which lifts the wool up as the wool is conveyed to the wool allocator to avoid the wool falling into the gap between wool collector and wool allocator.

Spraying system

The spraying system is consisted of submerged water pump, two sets of sprayer, hose etc. It is installed on both sides of the wool collector to wash the flights of wool collector.

Sweeper

Sweeper could be divided into two parts: sweeper of wool collector flights and sweeper of side conveyor.

The flights sweeper is mainly used to wash the wool residue adhered on the flights as some bulk wool would stick onto the flights during conveying and it could reduce the function of air induction if the blockade is not removed and washed timely.

The side conveyor sweepers are placed on the outside and middle part of the side conveyor. The sweepers are indispensable part and used to clean the wool felt on the belt.

Transmission part of wool collector

The transmission part of wool collector is comprised of drive shaft, drive chains, flights, chain tensioning device etc, is used to connect the flights and chains as a conveying system.

Side conveyor

Side belts are located on the top of wool collector and driven by individual drive to form neat side of the original felt. Water cooling pipe is placed on the outside of side conveyor to wash and cool belt.

Glass wool final products