Glass lined reaction pot

2. Structure: Open type (k-type) or closed type( F-type)

3. Material: Vessel: mild steel with glass lining inside surface: Jacket: Mild steel.

4. Design pressure: Vessel ≤0.2Mpa; ≤0.3Mpa; 0.4-0.6Mpa; 1.0Mpa; Jacket: 0.60Mpa

5. Accessories: One complete set of glass lined reaction port generally with motor with Reducer, Seal (optional: Stuffing box 2. Mechanical seal ), stirrer, Thermometer pocket, bottom discharge Valve

6. Properties and Advantages of glass lined reaction port:

1) Corrosion resistance: organic or inorganic acid, organic solvent and weak alkaline corrosion (not including hydrofluoric acid, containing fluorine medium, phosphoricacid and alkali when consistency is greater -than 30% and temperature greater-than or equal 180 Degree Cent.)

2) Pressure resistance: a) Packing box inside vessel: less- than or equal 0.20MPa; Jacket: less- than or equal 0.6MPa b) Single Mechanical seal inside vessel: equal or less than 0.30Mpa c) equal or less than 0.6Mpa.

3) Operation temperature: 0 to 200 Degrees Cent.

4) Glass layer thickness: 0.8 - 2.0mm

5) Cool shock: 110 Degrees Cent.; Thermo-shock: 120 Degrees Cent.

Note: 1. temperature should be slowly changed while heating or cooling glass lined reaction pot avoid damaging glass layer.

2. Glass lined reaction pot can not be used in hydrofluoric acid, medium containing fluorine, phosphoricacid, and alkali concentration greater -than 30% and temperature greater-than or equal 180 Degree Cent.