General industrial equipment low noise Cabin control Overhead crane

Lifting mechanismis electric trolley; it can equip with hook, bucket, grab, magnetic chuck and other lifting tools!

Spare parts:It can equip with two hooks, one main hook and one secondary hook!

Beam:It is composed of bridge frame, trolley, cart operating mechanism and electric equipment. The crane girder is produced without welding; it makes the beam much more strength!

Usage:It is applicable to transferring, assembling, check and repair as well as load and unload various materials!

Note:It is prohibited to use the equipment in the combustible, explosive or corrosives environment.

Operation:The operation of this crane is completed in driver's cabin, which has open type and closed type and an be installed on left or right side according to practical situation. The direction of entering the gate has two forms, sideway and ends, in order to satisfy the user’s choice under different conditions.

Speed: There are three speeds: trolley lifting speed, trolley traveling speed, crane traveling speed.

2). Compact design, optimal use of the size of work areas

3). Reasonable structure, favorable performance

4). Control the load easily and position the load exactly

5). Smooth starting and stopping

6). Superior safety and reliability

7). Low noise, commodious cabin and good view

8). Minimum& Easy maintenance, excellent exchangeability for parts and components

9). Saves electricity specifications

10). “One-Stop Shop” for your crane and hoist need

You can also give us the layout of the place where the crane will be used, that we can recommend the right one for your reference!

1. Overload protection:If the material is over the capacity, the crane will give a sharp warning for protection itself.

2. Emergency brake:If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.

3. Control Method:Room control or remote control to avoid any injure to the operation staff

4. Main lifting motor:with thermal protection and currency protection.

5. Hooks with latch

6. Rubber buffers

7. Protective earthing

8. Crane switch and travel end switch

9. Sub-assemblies characteristic are tested before assemly.

10.All cranes must be preassmebled and tested before leaving factory and offer the certification of test