Four-Motor Drying Laminating Coating Machine

Main Parameters

1. Flow direction From Left to Right

2. Max. laminating width 800mm

3. Max. mechanical speed 160m/min

4. Max. coating speed 150m/min

5. Max. unwinder diameter Φ600mm

6. Max. wind diameter Φ600mm

7. Tension ranges 2-30kg(Full width)

8. Tension accuracy ± 0.15kg

9. Laminating pressure 600kg

10. Min. air pressure 0.6mpa

11. Min. water pressure 0.2mpa

12. Wind and unwind paper core Φ76mm(ID)×Φ92mm(OD)

13. Doctor blade movement ±8mm

14. Drying form electric heating, steam heating, oil heating,(Note: gas furnace purchased by user)

15. Highest temperature in oven 80°C(Ambient temperature 20°C)

16. Machine total power 95kw

17. Dimensions 12500(L)*3200(W)*3300(H)mm

18. Power three-phase five-wire 380V, ±10%

19. Machine weight 10T

20. Machine colour ivory white

Machine ten features

1,Adopt importing vector frequency conversion four motors full-closed-loop control.

2,Human machine interface display operation, simple and fast operation.

3,Double-position feed in and feed out, easy loading and unloading.

4,Using three rollers to laminate. (improve laminating pressure and initial bonding strength).

5,Stainless steel channel drier(no corrosive).

6,Laminating roller external oil heater. (Small temperature difference)

7,Large displacement exhaust fan unit, no solvent residues in products.

8,Oven guide roll independent driver control.

9,Double-feeding material automatically pressing roller non-stop connect material.

10,Pre-start synchronously to automatically cut material.