fishing boat flake ice machine on board ice machine trawler flake ice machine

Configuration:

Compressor:Bitzer piston compressor

Evaporator:SS316 strong corrosion resistant

Expansion valve:America T1 series of ALCO

Condenser:horizontal shell and tube condenser water

Cold media:environmental R404A

Controller:LG PLC programmable logic controller card

Power:3P/380v/50Hz

Water supply:diameter1/2’,Pressure of 0.14Mpa

LRER flake ice features:

1 The temperature of ice is lower and it can reach 8 celsius degree below zero

2 Ice is dry and transparent, good looking shape, non-caked, good mobility and sanitary.

3 It has the flake shape so that it has big contact area with refrigerating products and the effect is excellent.

4 Flake shape and no sharp edges, cannot destroy refrigerating products and it is beneficial for storage and transportation.

5 The thickness of flake ice is 1.8mm-2.5mm. No need to crush and can use at any time.

Working conditions:

1.Electrical require: Full electric system complying
2.Standard condilion: Water inlet temp.15°C Amibenttemp. 25°C
3.Application condilion: Ambient temp.5°C~40°C water temp. 0.5°C~35°C
4.Special condition: Ambient temp.-30°C~60°C water temp.0°C~46°C
5.Ice thickness: 1.8~2.5mm
6.Refrigerant: R22 ,R404A

Evaporator Features:

1.Its evaporator with fixed vertical design is made of SUS316 strong corrosion resistant .And the automatic protection welding equipment and annealing heat treatment furnace ensure the ice machine high quality and performance better.

2.We have has complete mechanical processing equipment,and advanced and perfect processing and heat treatment technology,senior production technical personal and project design talents,strict testing methods and quality control plan.All these make our products quality safer and more excellent.

3.The high-performance annealing heat treatment equipment can eliminate the welding stress with its 850°C high temperature annealing treatment ability,which can guarantee ice bucket good material mechanics performance and prevent the evaporator inner wall from deformation forever.

4.Our spiral ice blade researched & developed and produced by ourselves independent is make of high-performance high-performance strong stainless steel and formed through only one time process.Its scientific structure,clean hygiene,reasonable spiral angle and accurate cylindricity make it cut ice with less resistance,no noise,vibration and balance.

Lier LRH4T Fishing boat Flake ice machine technical parameters:

Tips:

1.The voltage, dimensions,cooling type,material and split-type can be produced according to customers requirement.

2.The split installation or external condenser to these model is available according to customer's requirement.