Fiat New Holland 640 Tractor (Pakistan Assembled)
| Condition:New | Type:Wheel Tractor | By wheel:2WD | Usage:Farm Tractor |
| Drive Type:Gear Drive | Power(W):75HP | Certificate:Other | Brand Name:Fiat New Holland |
| Model Number:NH 640 | Place of Origin:Pakistan | Genuine:Red |

At flywheel 75 HP
OPERATING WEIGHT:
2,070 KG
ENGINE:
| New Holland 8045.06 | |
| 4-Stroke, direct injection diesel engine | |
| Number of cylinder: | 4 |
| Bore and stroke: | 100 x 115 mm |
| Piston Displacement: | 3,613 cc |
| Compression ratio: | 17:1 |
| Max. Power at 2,600 rpm: | |
| Max. Torque at 1,600 rpm: | 29.9 kgm |
| Dry-type cylinder liners | |
| Cooling system: | water |
| Five-row, brass tube and copper fin radiator | |
| Forced-feed lubrication system. | |
| Two power outlets for hydraulic pump on timing cover. | |
| Distributor type fuel injection pump with mechanical speed governor. | |
| Exhaust muffler: | vertical |
| Five bearing crankshaft. | |
FILTERS
Air:Oil-bath with pre-cleaner and automatic dust unloader;
Fuel:2 replaceable cartridges;
Oil:Easy-to-change, continuous-flow cartridge
CLUTCH
Dual plate, dry-type with separate controls (pedal for transmission and hand lever for PTO), Diameter of plates: 11 inch
Plates facing of asbestos compound.
FRONT AXLE
Inverted U section, telescopic type.
TYRES
| Front: Rear | 7.50-16 16.9/14-30 |
TRANSMISSION:
Gearbox with constant-mesh gears:
8 forward and 2 reverse speeds.
Synchromesh on 3rd, 4th, 7th and 8th speeds Double control lever.
Bevel gear 12/47
Differential lock with pedal actuated and automatic disconnection.
Spur gear final drives.
Gear Box mounted starter safety switch.
Square type with flat top.
THREADS
Front (8 positions):
1.320 - 1,420 - 1,520 - 1,620 1,720 - 1,820 - 1,920 - 2,020 mm.
Rear (8 positions):
1,320 - 1,420 - 1,520 - 1,620 1,720 - 1,820 - 1,920 - 2,020 mm.
Hydrostatic with independent circuit.
Minimum turning radius:
-with brakes: 3,400 mm
-without brakes: 3,700 mm
POWER TAKE-OFF
6 spline shaft - 35 mm dia / 1-3/8"
Standard: fully independent,
Engine speed (rpm) 1,967 2,500 PTO speed (rpm) 540 659 High speed DTO 35 mm dia / 1-3/8"
HYDRAULICS LIFT
With draft and position control,
Draft control through top link.
Gear type pump driven from engine crankshaft.
Pump capacity (at 2,400 engine rpm): 24.8 l/min
Relief valve opening pressure: 190 kg/sq.cm
3-point linkage Cat I - II
Sway chains.
Lift lever lock bracket.
Max. Lifting capacity: 1,650 kg
DRIVER'S SEAT
Fully upholstered, with parallelogram suspension, adjustable to driver’s weight.
BODY
Hood with side-hinged cover for engine inspection. Front grill is easily removable for quick access to air cleaner and battery.
LIGHTING SYSTEM
3-position headlights (parking, low & high beam).
Rear parking lights.
Blue high beam warning light on instrument panel and low oil pressure & battery charging light.
Direction Indicators, Parking & Head lights.
ELECTRICAL SYSTEM
12 volt starting system, 400 watt alternator, 108 ah battery.
CAPACITY
| Fuel tank: Engine oil: Hydraulic Transmission: Rear Axle: Air Cleaner: Power Steering: | 54 ltr 11.5 ltr 18 ltr 4+4 ltr at both sides 01 ltr 1.5 ltr |
BRAKES
Service dry band-type; mechanically operated.
Parking:manual lever.
OPTIONAL
AC Cabin, Canopy, Towing hook, Swinging Draw bar, Cold Starting aid, Front weight, High Clearance Kit, Low Clearance Kit, DTO pump applications and Creeper gear etc.

| Packaging Detail:As per demand (Wooden / Steel) |
| Delivery Detail:Minimum turn around time |

