electric hoist

CD1,MD1 series electric hoist are the kind of light-small lifting equipment with advantages of tight structure light, small volume, wide common use and convenient operation etc.

Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.

Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric apparatus controlling system: Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition.

Hook:The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.

Please kindly tell us your detailed requirement and the working conditions, we can help you to choose which model is much more suitable to your requirement.

Order notice:

We need to know the following information to give you the suitable offers:

1- Lifting capacity

2- Lifting height

3- Work duty

4- Power supply

We also design and manufacture non-standard products according your specific request.

Sincerely looking forward to cooperate with the buyers around the word. Such as you wish, welcome to contact us.