efficiency and scrap tire pyrolysis plant for oil

High-efficiency and newest scrap tire pyrolysis plant for oil

Working process:

(1) Firstly, make reactor rotate clockwise 0.4r/min, put raw material into reactor, close feeding door.

(2) secondly, burned the fuel material(coal,or wood,or natural gas ,oil) in the furnace. Reactor will be slowly heated, when the temperature reach around 180oC,oil gaswill come out .then go to cooling system and liquid to oil.

(3) thirdly, Some incondensable gas which can't cooling down will be lead to furnace through a gas pipe. It will be used to heat reactor.This cansave your energy. Only the first 2 hours use energy for heating. After the first 2 hours mainly use gas, little energy is ok.

(4) Afterpyrolysis, all the oil gas come out from reactor, the temperature will fall down. Then make it rotate anticlockwise,carbon blackdischarging begin.

(5) Lastly,when the temperature deduce to 80oC, worker can open the door of reactor and takesteel wireout.

Then u can start the next batch.

The equipment can pyrolysis waste tire, waste plastic and waste rubber, the outcome is crude oil and carbon black. If the raw material is waste tire, it can also output steel wires. All the products are used widely, so you can sell them directly.

The applications of the outputs:

Fuel oil can be used in:

Carbon black can be used in:

1.electric cable jacketing 2.conveyor belt 3.hose and doormat 4.black nylon bag

5.rubber additive 6.battery 7.greenhouse

8.black colorant in rubber materials 9.plastic pipes

10.industries rubber products 11.fire fighting 12.drying equipment

Carbon black operation process

Separation--material on the sieve will enter the magnetic device when it is extruded and crushed by roller. At the same time, steel wire falls down the store system, and the material will go on entering the magnetic devices--second separation--third separation--lift machine--grind machine--screw conveyor--activated process--granule production--package and seal--in storage.

BENEFITS FROM DTPPL ADVANCED PYROLYSIS TECHNOLOGY:

· Recover energy and value from waste in the form of fuel and charcoal

· Reduces plastic and tire land pollution

· Eco-friendly recycling of plastic and tires

· Commercially viable process

· End product oil is used as substitute to LDO/Furnace oil

· Perfect solution for Polymer waste management

· Raw material (waste tires, waste plastics) easily available

· Lower reaction temperature of 350 to 475 degree C (variable depending on raw material type)

· Zero emission process: no harm to environment

· Lesser reaction time and more energy savings

· Optimum conversation of polymer waste into hydrocarbon liquid with negligible wax content

· Plant is 'Energy self sufficient

The terms of payment:

1). 30% advance payment within 7 days after sign the contract by T/T.

2).70% after receiving the copy of Bill of lading from the seller by T/T.