DYJ Waste Motor Oil Recovery and Oil Regeneration Equipment

Oil Regeneration, - Waste engine oil purification, - remove color, dirt, gas, water, carbon particles, deteriorated oxide, etc. - details see: https://www.machineto.com/dyj-waste-motor-oil-recovery-and-oil-regeneration-equipment-10228776
Condition:NewFlow:30~250L/minWorking Pressure:less than 0.8MpaPlace of Origin:China (Mainland)
Brand Name:MEIHENGModel Number:DYJ-TB SERIESUsage:Lubricant OilVoltage:380V, 220V, 110V, 400V, etc.
Power(W):25~54KWDimension(L*W*H):2300*1800*1980mmWeight:1500kgAfter-sales Service Provided:Engineers available to service machinery overseas
DYJ Waste Motor Oil Recovery and Oil Regeneration Equipment
contact supplier for DYJ Waste Motor Oil Recovery and Oil Regeneration Equipment


engine oil regenerating equipment

DYJ-TB Waste Engine Oil Discoloring and Oil Regeneration Equipment

Application:

DYJ-TB seriesWaste Engine Oil Discoloring and Oil Regeneration Equipment is used to purify the waste engine oil, it can efficiently remove the abrasive dust, foundry sand, impurities, moisture, organic acid and inorganic acid from the waste engine oil, and remove carbon particles, deteriorated oxide etc...Articulates from waste engine oil, and also remove gelatin and asphalt from the oil. It can break the emulsion and improve the color of the oil, make the purified oil's color approximate to the new oil, recover the oil's property and improve the engine oil's operation performance, reduce the abrasiveness, to assure the engine oil lubricating system operate normally, prolong the service life of the gas engine and the oil. It can save the cost of oil and save the fuel resource. It can be widely used in oil field, mine, metallurgy, electric power, traffic, manufacturing to filter hydraulic oil, machinery oil, cooling oil and engine oil which is used in vessel and automobile for oil regeneration purification treatment.
Characteristics:

1. Strong ability of filtering impurities refers to the characteristics of the waste engine oil: Heavy particle sand, much impurities, badly dirty oil, it combines magnetic filtration with densification filtration step by step.

2. It can remove the water and other harmful air in the oil.

3. Adopted step air-cooling and waste air filtration to deal with themixed air which had been pumped in the system.Increased the equipment's effective output, prolonged the life-span of the vacuum pump. It is not only protecting the vacuum pump, but also protecting the environment.

4. The system has the advantages of pressure mechanical filtration, vacuum filtration, and centrifugal filtration. It is not only overcome the disadvantage of plate oil purifier, but also can remove the acid, gas and emulsion that normal oil purifier and centrifugal oil filtration machine cannot do.

5. Adopt advanced fuzzy oil temperature device, set upper and lower limits of the oil temperature discretionarily. It makes the oil temperature control come true at the section to avoid heating alternating contactor working frequently, prolongs the service life of the contactor.

6. The machine has a perfect protection device. It monitors the temperature, pressure, vacuum degree, power cut, overpressure and low-voltage, prevents from the accidents effectively, and assures the machine can operate well.

Part 2 Main Technical Parameters of DYJ-TB Multi-function Lubricating Oil Discoloring Purifier

Item Name

Type

Unit

DYJ-TB 30

DYJ-TB 50

DYJ-TB 100

DYJ-TB 150DYJ-TB 200DYJ-TB-250

Flow Rate of Oil In

L/min30

50

100

150200250

Purification Capacity

L/8h900

1500

3000

450060007500

Inlet(Outlet) Pipe Diameter

mm32

32

38

424860

Rated Total Power

Kw/h25

32

38

424654

Rated Heating Power

Kw/h15

21

24

273036

Average Power

Kw/h16.5

22

25

303642

Purification Cost per Ton

USD/T

16.666~83.333

Applied Power Supply

380V,50Hz, three phases four lines

Working Temperature

°C

30~160

Working Pressure

Mpa

≤0.8

Noise

dB(A)

≤75

Working Vacuum Range

MPa

-0.095~-0.06

Net Weight

Kg680

800

960

105013001500

Overall Dimension

Lmm

1500

16501700

1850

20002300
Wmm

1100

13001400

1450

16001800
Hmm

1750

18001850

1850

19001980

Part 3 Oil Index after Purified by the Purifier

Non-Mixed Stowage National Standard Oil

ItemUnitAcceptance Standards
Kinematic Viscositymm2/sGB/T265
Density(20°C)kgm3GB/T1885
Flash Point°CGB/T3536
Pour Point°CGB/T3535
Acid NumbermgKOH/gGB/T264
Mechanical Impurities%GB/T511
Water Contentmg/kgGB/T0207
ColorChromaticity NumberSH/T
Demulsification Properties54°C(40-37-3)ML/minGB/T7306

Remark:Inspection acceptance of Mixed Stowage Oil and Non-national Standard Oil shall be in line with our tested sample oil purified by our purifier.

DYJ Waste Motor Oil Recovery and Oil Regeneration Equipment
Packaging Detail:STANDARD WOODEN CASE OR NAKED PACKING
Delivery Detail:WITHIN 35 WORKING DAYS AFTER ORDER CONFIRMATION

Related Product for DYJ Waste Motor Oil Recovery and Oil Regeneration Equipment