Home  >  Industrial Supplies  >  Industrial Air Conditioners

be used at -18 'c for saving meats and fishes, compressor power: 4x550 w, evaporator areas 160 square meters - details see: https://www.machineto.com/dd-32-160-evaporator-air-cooler-for-cold-storage-room-10222739

DD-32/160 Evaporator Air Cooler For Cold Storage Room

THIS TYPE: DD-32/160 can be used at -18°C for saving meats and fishes , and this type chiller cooling capacity indicates: T library = -18°C ΔT=T-T0=7°C, library fin space is 6 mm.

Technical parameters

model	POWER (w)	CAPACITY Δ T=7 °C (W)	EVAPORATOR AREAS (M2)	gw(kg)
DD-32/160	4x550	32000	160	290

FAN (380V)(220V)			MELTS FROST ELECTRIC HEAT PIPE (220v)		INTO THE LIQUID (MM)	BACK TO STEAM(MM)
AIR-VOLUME (m3/h)	DIAMETER (mm)	RANGE (M)	COIL PIPE (KW)	WATER PAN (KW)
4x6000	500	15	5x2.6	2.6	25	50

Installation dimension

model	A	B	C	D	E	F	E1	E2	E3	drain(size)
DD-32/160	3360	630	680	420	3080	100	760	760	760	1''

1. The housing is in plastic-sprayed coat or rolled, iron plate or aluminum paned, best in corrosion protection, beautiful in shape.

2. Original coil arrangement to reduce the side resistance. The aluminum fins are fastened to the steel tubes by hydraulic expanding way, which is effective to reduce thermal contact resistance and improve thermal transfer.

3. After pressure test, wash with trichloroethylene to clean oil dirt, moisture, oxide and other impurities inside. As such, no blocking trouble after filling refrigerant in use.

4. Special fan motor, which is low in power consumption, large in air volume, low in noise, and far in air throw, guarantees good performance in humidity and low temp.

5. Equipped with U-shaped electro-thermal tube that's good-in insulation inside the coil, rational gap arrangement and power ability to achieve defrosting performance.

6. Groove-type channel clip, easy to install.AndFilled with nitrogen before leaving factory. andWe can also manufacture according your require.