DC Mini Gear Motor Plastic Gear 10mm for Beauty Products

DC Mini Gear Motor Plastic Gear 10mm for Beauty Products ( KM-10A1012-171-2.5110 )

1.MEASURING CONDITIONS
1.1.Rated voltage: 2.5 V DC
1.2.Motor Position: To be measured with motor horizontally held.
1.3.Environmental temperature:+5°C~+35°C
1.4.Environmental humidity:40%~85%RH.
1.5.Staring Valtage: ≤ 0.6 V

2.ELECTRICAL CHARACTERISTICS(At initial stage after 30 seconds run-in):
2.1.At No load
2.1.1.Speed: 110 ± 15 rpm
2.1.2.Current: ≤ 105 mA
2.2.At On load
2.2.1.Torque: 102 g.cm
2.2.2.Speed: 92 ± 10 rpm
2.2.3.Current: ≤ 260 mA
2.3.At Stall
2.3.1.Torque: ≥ 480 g.cm
2.3.2.Current: ≤ 850 mA
2.4.Direction of Rotation: CCW ( (Counter-Clockwise when viewing from the output shaft end with positive voltage applied to positive terminal.)

3.MECHANICAL CHARACTERISTICS
3.1.Dimension drawing: See<OUTLINE>.
3.2.End Play:0.05~0.35 mm.
3.3.Operating Temperture: -10°C ~ +60 °C

Remark:The above technical data of the mini gear motor are only for reference,we can customerize them according to different requirements after evaluation.