custom shell and tube heat exchanger

A shell and tube heat exchanger is the most common type of heat exchanger designs. As its name implies, this type of heat exchanger consists of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle, and may be composed by several types of tubes: plain, longitudinally finned, etc.

P Process liquid or gas cooling

P Process or refrigerant vapor or steam condensing

P Process liquid, steam or refrigerant evaporation

PProcess heat removal and preheating of feed water

P Thermal energy conservation efforts, heat recovery

P Compressor, turbine and engine cooling, oil and jacket water

P Hydraulic and lube oil cooling

JLess expensive as compared to other type coolers.

J Can be used in systems with a wide range operating temperatures and pressures.

J Pressure drop across a shell and tube heat exchangers is less.

J Tube leaks are easily located and plugged since pressure test is comparatively easy.

J Tubular coolers in refrigeration system can act as receiver also.

J Using sacrificial anodes protects the whole cooling system against corrosion.

J Extended heat transfer surfaces (fins) can be used to enhance heat transfer.

J Cleaning and repair are relatively straightforward, because the equipment can be dismantled for this purpose.

Y Materials: Titanium, Stainless Steel, Carbon Steel ,Copper Alloy

Y Operating Temperatures:-50~350°C

Y Operating Pressures:max 10MPa

Y Standard:ASME,TEMA,GB151,JIS B 8249,CB3300, classification society(ABS DNV CCS GL LR NK)

Y Construction: Fixed Tubesheet, floating head, U-Tube, 1 or more pass, double tubesheet

Y Applicable Medium: gas, water, steam, oil, fuel, corrosive media