cuffed machine and pressing machine all-in-one machine(Free welding) for outer tank of solar

solar water heater cuffed/folding and pressing all-in-one machine(Free welding), Automatic shell production line - details see: https://www.machineto.com/cuffed-machine-and-pressing-machine-all-in-one-machine-free-welding-for-outer-tank-of-solar-10165943

Type:punch machine	Use:Sheet	Place of Origin:Shandong China (Mainland)	Brand Name:Hengshuo
Model Number:121515265816

cuffed machine and pressing machine all-in-one machine(Free welding) for outer tank of solar

contact supplier for cuffed machine and pressing machine all-in-one machine(Free welding) for outer tank of solar

ART.NO.	121515265816
NAME	Tapping and lock machine
SPECIFICATION
TYPE	Automatic shell production line

product instruction

Automatic shell production line—tapping and lock machine

Tapping and lock machine for the raphe of the water heater’s outer barrel:

This machine is processed by taking reference of WC67Y—63/2500 press machine and American’s advanced technical specification.

Machine body type: with one site close and the other site open

Transmission: with crank connecting rod to drive the toothed gear, air clutch and arrester brake. The bottom lever is with one end fixed and the other end a movable pivot point to work.

Mold :with both tapping and locking function

The main performance parameters and configuration

item	parameter
Technical specification	shape	round
	Minimum punch pressure	Min600KN(60>52≈1800×7×4=50.T
	Design ability	80T
	Barrel diameter	MinimumΦ350(barrel length :2000mm)
	Maximum length of the barrel	According to customer’s requirement
	The regulated quantity of the bottom lever	30mm
	The regulated quantity of the pallet	5mm
	The stroke of the pallet	70mm
	Consecutive punching	60times/min
Operation parameter	Processing pieces	3pieces/min(350mmfor barrel)
	The height of the mould’s highest point	1300mm
	Module of the main parts	maximum Underbeam curve section modulus :90cm3
		240-290 steel
		Accountable module, 1240>869(cm3)
	The machine structure is designed by actual demand
	Transport system structure is made by sliding bearing
	Air clutch and brake
Lubrication method	Axle sleeve is lubricated by oil cup
Electronic control system	Single control, two/four control on working, automatic control
Operation condition	Workpiece supplying way	Manually
	Workpiece moving way	manually
	Workpiece transport way	Manually or automatic
Machine body	Machine body	Wholly welded, aging treatment
	Lead rail of the pallet	Rectangle lead rail with panel
	Protection of the machine	With protection cover for some part of the machine; with mechanical protecting function
	The mould’s top protection	Mechanical safe protection
	movable air cylinder	Response time: 2 seconds
mould	Mounting type	Built-up mould
	Turn on method	Reposition by spring; life time of the spring:100,000times
Electric control facility	Electric specification	Primary power supply	380V±10%
		Input circuit	380V
		Main motor circuit	24V
		Controller circuit	380V
		Machine illumination	36V
	Accident stop	Panel operation
	Click protection	Thermorelay, overload protection ,ground protection