Crane hometown Xinxiang single girder gantry crane 5 ton
Company profile
Gantry Crane, Bridge Crane, Portal Crane, Jib Crane, Electric Hoist and Hydraulic hoisting machinery.
Technical parameter
| Capacity | T | 3 | 5 | 10 | 16 | 20 |
| Span | m | 12,16,20,24,30 |
| Lifting height | m | 6,9 |
| Operation method | | Pendent line with push button/ cabin |
| Speed | Lifting | m/min | 8,8/0.8 | 8,8/0.8 | 7,7/0.7 | 3.5 | 3.5 |
| Cross travel | m/min | 20 | 20 | 20 | 20 | 20 |
| Long travel | Ground | m/min | 20 | 20 | 20 | 20 | 20 |
| Cabin | m/min | 30,40 | 30,40 | 30,40 | 30,40 | 30,40 |
| Electric hoist | type | CD1/MD1 |
| Working duty | | A5 |
| Power supply | AC | 380V/50HZ/3P or on your request |
More about the Crane hometown Xinxiang single girder gantry crane 5 ton
General introduction of gantry crane
L model single girder gantry crane is a kind of lifting equipment which can be mountedwith the electric hoist. It not only has the advantage of MH modelsingle girder gantry crane but also can be used in the transfer environment, and easy to transferthe heavy goods.
Application
It can be widely used in the plants, factories, warehouses, goods yard, workshops environmentsto load or unload goods and improve the working efficiency and save the labor.
Control methods
Pendant control
It signs six positions control, that is, up and down, left and right, front and end, some even up tonine positions to control.
Remote control
It is similar to the pendent control, the difference between both is remote control adoptingwireless control, adopting receiving signal.
Cab control
In general, cab control is used in the heavy tons, because it is so expensive. However, it isthe most comfortable one in the three.The driver in the cab controls everything, there are comfortable chair and all electric parts.No matter what happens, all working worker must obey the driver's instructions.
Production line photos