Copper Flats Melting Furnace

Copper Flats Melting Furnace, 1) Higher Yield, 2) Faster Start up, 3) Natural Stirring, 4) Available Capacity 25 KGS -3 TONS - details see: https://www.machineto.com/copper-flats-melting-furnace-10159290

Condition:New	Type:Induction Furnace	Usage:Melting Furnace	Place of Origin:Gujarat India
Brand Name:MAGNALENZ	Model Number:Copper Flats Melting Furnace

contact supplier for Copper Flats Melting Furnace

Induction Melting Of Copper INDUCTION MELTING FURNACE FOR THE MELTING OF COPPER
AVAILABLE CAPACITY: IN KGS:	25 KGS TO 3 TONS
IN KW:	15 KW TO 1500 KW
UNIT CONSUMPTION IN MANGALENZ INDUCTION MELTING FURNACE @NORMAL CONDITIONS: *IN ACTUAL RUNING CONDITION:	410 KWH/TON TO 450 KWH/TON OF COPPER MELTING
POURING TEMP FOR COPPER :	11000C TO 11500C
WHICH TYPE OF MAT. CAN MELT IN THE MAGNALENZ INDUCTION MELTING FURNACES:	1. SCRAP OF COPPER/FLATES/STRIS. 2. COPPER WINDING WIRES. 3. COPPER CHIPS/SWARFS 4. COPPER INGOT WITH ZINK ALLOYING.
RECOMMENEDED LINING FOR COPPER MELTING :	1. ACIDIC (SILICA LINING WITH 1% TO 2% BORIC ACID.) 2. NEUTRAL. *SHOULD HAVE EXCELLENT RESISTANCE TO CHEMICAL, THERMAL AND MECHANICAL DAMAGE, WITH A LOWER SINTERING TEMP. TO SUIT TO COPPER MELTING.
APPROX REQUIRED COMPONENTS IN PERCENTAGE PRESENT IN LING MAT. FOR. COPPER MELTING IN INDUCTION FURNACE:	%
	AL2O3		< 0.2
	SIO2		97
	CAO		< 0.5
	FE2O3		< 1.0
	MAX. GRAIN SIZE/MM		4
	BONDING		CERAMIC
	SERVICE TEMP:		15500C TO 16000C
FORMER MATERIALS:	3. COPPER SHEET FORMER
RECOMMENEDED CHURING (STIRRING):BASED ON H/D RATIO IN INDUCTION MLETING FURNACE FOR COPPER MELTING	COPPER COPPER ALLOYS	0.15 TO 0.21 0.07 TO 0.125
MODERAT CHURNING/STIRING IS ADVICABLE IN ANY CASE, FOR LOW LOSS OF COPPER, WHILE MELTING IN INDUCTION FURNACE: