Construction building hoist

Construction building hoist

Our construction hoists are specially used for lifting passengers and materials under construction of high-rise buildings, tower, bridges, plant, chimney, and so on like that outdoor.

Protective Measures:

1. A Master switch On the operation board: When the button closed, unexpected action to other buttons can not let cabin working.

2. Anti-falling safety device(with Centrifugal breaking system ): When all other protection device losing action, it can brake the cabin from falling.

3. Mechanical inter-locking door: when the cabin running it can close by itself from protecting people from dropping.

4. Overload calling device.

5. upper and lower travel limit: They can limit the cabin go over the top mast.

6.The top mast section have no rack in order to limit the cabin overrunning and dropping.

7. Manual button:You can operate the botton to let the cabin go down wheninterruption of power supply.

8. Emergency switch: When the cabin losing control and over-runing, you can operate the button.

Main technical parameters:

1. Construction hoist of common models:

2. Construction hoist with Interver:

Adopting advanced technology, it can also be equiped with electrical overload warming device, auto landing-call equipment or autimatic leveling device according to your requirement.

A. D.O.L Common electrical type: This is the common one

B. PLC Electrical system type: The advantages like below:

1.Powerful anti-jamming performace.

2.Programmable design and electromagnetic wave shielding.

3.Better In Adaptability: adapt to different working conditions.

4.Keep hoist in safe conditions by Detection and Recognition for machnical or electrical errors.

C. Inverter electrical system type: The most advanced type and have the following advantages:

1.Start / stop very stable: Start in low speed and decelerate to stop. It is so stable for equipment and comfortable for passengers

2.Ulta-low voltage starting: The starting voltage floating rate is within 20% (300v-450v, the normal is 380v)

3.Apparent Power saving:Inverter type can save power about 25%-40% compare with the common type

4.Mild performance: Prolong the service life of the rollers, brake block, pins, mechnical driven and electricals.Can decrease the friction and wear between each parts.

Product details:

1. Production process: Strict material selection— blanking— inspection — welding— inspection— Blasting — inspection —Baking finished or galvanized— inspection — Finished Product

2. The product can be customized according to customers'requirements(drawing, specifications and so on).

A:The cage is boarded up by all punched aluminum sheet , The sizecan be arranged to your requirement

B:Main structure of cage is made of high-quality steel after bending.(The bended steel is firm, good verticality, stability. Moreover it ensure stable of the whole structure)

C:The Mast section(color is variable) is made of seamless pipe.(The high quality seamless steel pipe is good verticality, anti-pressure, anti-aging, thickness and so on)

D:Equiping with fall arrestor

E:The cage without operate cabin

F:Equiping with interver construction hoist

F:Access door interlock device protect the safety of people and material.

Workshop Details:

1.All Production Line adopt standard of the fixture, mould, gauge

2. The product can be customized according to customers'requirements(drawing, specifications and so on).

4.Construction site

5.Different driven system

6.Transport to Qingdao(China) port

7.Qingdao(China) exhibition

8.International Certificetion