Complete Fully Automatic Tire Recycling Plant/Waste Tire Recycling Line

Detailed Product Description:

Waste tyre shreddering and recycling machine is mainlyused for crushing waste tires into rubber powder for reuse.

The Process flow:

1200tire debeade---1200 tire cutter---900belt conveyor-Whole tire shredding machine-

600belt conveyor------560 tire crushing---filtering---magnetic screening---rubber power.

Processing method:

1) Physic mechanical crushing method at normal temperature of waste tyre:

no chemical raw material is required,no waste gas,waste water and soot are discharged,and the cooling water of the equipment is reused,no emission,equipment noise is within the range specified by the country(GB20055-2006),fineness of rubber powder produced by it is adjustable(10 meshes to 30 meshes).

2) Take waste tyre as example,the process is as follows:

breaking down,crushing,filtering,magnetic separating,grin-ding,then the finished products are produced.

No.11200tire debeader

use:For pulling out the wire loop from the mouth of tire.

Parameters of tire crusher

No.21200 tire cutter

Use:more than 800 tyres need this kind of cutting machine, after cutting can break in the broken tire machine.

No.3900 belt conveyor

Use:transport the tire into 900 whole tire shredder.

No.4 whole tire shredding machinery

Application of tire machiney to grind tire
This machine is a special equipment for crushing tyre under normal temperature into small size(3-8cm), in order to go to next step, grinding the rubber power(10-30mesh), separating steel wire and fibre.

Technical parameter of waste tire crusher recycling tire machine

No.5600 belt conveyor

USE: Transport the block of 50*50 from the whole tyre crusher to the strong crusher.

No.6XKP-560 double roll rubber Crusher

Use of Tire Crusher

1.The rubber cracker mill is mainlyused for grinding tyre and some other rubber products, turning the rubber products intogranulethat the customers' need or any other type products.

2.Beingdifferent from the open mixing mill,the roller of the machine has groove, used for crushing the raw rubber before plasticizing.

3.Using vanadium titanium alloy chilled cast iron roller,the surface is hard wear-resisting, after roll for trench roller, internal processing, so that the roll surface temperature uniformity, The machine is equipped with an overload protection device, protect themain components from being damaged due to overloading

The parameters of rubber crusher