Carbon machine

Carbon machine, 1) Rotary kiln for activated carbon, 2) with S.S surface and fire bricks inside, 3) around 60-80t - details see: https://www.machineto.com/carbon-machine-10025701
Processing:Heat ExchangerPlace of Origin:Hebei China (Mainland)Brand Name:DINGYUANModel Number:DYACM-C
Processing Types:Other   
Carbon machine
contact supplier for Carbon machine


Carbon machine
1)Rotary kiln for activated carbon
2)with S.S surface and fire bricks inside
3)around 60-80t

Activated carbon machine/kiln Introduce:

1.Rotary kiln

1.handling by bringing it into direct contact with a heated steam. Thedryeris made up of a large, rotating cylindrical tube. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material under the dryer

2.Working principle of the rotary kiln dryer:

Material to be dried enters the Kiln, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow).

The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer is known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

3. Rotary Kiln Dryer main technical parameter:

ItemsDescriptionAssistant
equipment
SizeMaterial requestCapacity
MT/Day
Activated
carbon purpose
PRICESERIVCE
1Woker operate
stove
Woker operate stove use fire bricks,one set have two stove,can work by one worker ,feeding /output / others operating by workerA:boiler,
B:steam tank ,
steam pipes,water pipes,valve,pressure meters,
C:tools for worker operating.
5.5*3.5*
2.5m
not include
the boiler
shell charcoal
(coconut shell charcoal, palm shell charcoal,kemili shell charcoal,other hardnut shell charcoal)
1-2MT/DAYA: water purification material:
B:air clean :
C:MSG
D:alcohol
E:medicion
F: Chromed plated
G:petrochemical industry
H:Filter
I:carrier actived carbon
50000USD
/set
A:send china workers building ,when can produce product smooth ,project finish .
B:Supply two time free repair service ,seller pay the flight cost ,others belong to buyer.
D: if buyer mistake cozed the machine broken ,seller can repair ,all charge for buyer.
2Rotary
stove
Rotary stove ,
auto-feeding,output use workers ,Stainless steel body and fire bricks inside ,together with steam pipe .outside with gear and other equipment
A:boiler,
B:steam tank ,
steam pipes,water pipes,valve,pressure meters,
C:AUTO feeding systerm
D:Motor for rotary gear and feeding
E:tempreture screen and inside testingmeter
15*1.8m
not include
the boiler
shell charcoalIODINE 1000mg/g
3-4MT/DAY
A: water purification material:
B:air clean :
C:MSG
D:alcohol
E:medicion
F: Chromed plated
G:petrochemical industry
H:Filter
I:carrier actived carbon
260000USD
wood charcoal decolor actived carbonMB 12ML/G
1.5MT/DAY
A:wooden Powder decolor
B:MSG
C:Medicion

3Upright
stove
(SLEP stove)
upright stove ,
auto-feeding,output use workers .
mainbody use fire bricks . together with steam . with windowns holes outside.
A:boiler,
B:steam tank ,
steam pipes,water pipes,valve,pressure meters,
C:AUTO feeding systerm
D:Motor
E:tempreture screen and inside testingmeter
F:Other equipment for structure
7*7*13m
not include
the boiler
Shell charcoal166#

IODINE 1000mg/g
4-5MT/DAY
A: Water purification
B: Glod
C:carrier actived carbon
D:air Clean
E:MSG
F:Chromed platated
G:petrochemical industry
H:alcohol
I:Filter
J:chemical use
340000USD

Service & Support

Service hot-line: 0086—311-83338818 / 13473768866

Packing information:

nude packing or be negotiable according the order

Service & Support

Service hot-line: 0086—311-83338818 / 13473768866

Packing information:

nude packing or be negotiable according the order

Carbon machine
Packaging Detail:nude packing or be negotiable according the order
Delivery Detail:30-50days after received the DP or LC

Related Product for Carbon machine