brine evaporator

We are a professional heat exchanger, condenser, evaporator, heat pump,air cooler

and air conditionermanufacturer in China,which has more than15 years experience

in HVAC area.Our products have been exported toEurope,USA, Japan and Middle

east etc.

The technology to create perfection:

1.The fins produced are of vry high standard of quality having flare position made of

plain,wave type

2.The edge of fins can be straight or ripple depending upon application.

3.All the coils are 100% tested for leakages and passed through the heating oven with

t air circulation for inside and ourtside cleaning and charged nitrogen.

4.The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer

of co-densers and evaporators.

5.The row material of excellence:We source only the best quality raw material from

aroud the world,,to manufacture heat exchangers that are of globally acceptable

standards;

6.Plain copper pipe of 7mm,7.94mm,9.52mm and 12.75mm diameter.

7.Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features

1) material :copper tube and fin, galvanized plate

2) fin type: louver fin or flat fin or corrugated fin

3)copper pipe: diameter 7mm or 8mm or 9.52mm ,grooved or smooth tube

4)pitch of fins can be adjusted between 1.8—5.8mm.

5) pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM

6) suitable for R134A, R22, R404A, R407C refrigerant and so on

7) voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
8) different alternative condensing fans available: shaded pole or outer rotor fan motor.
9)did gas examination under 3.0Mpa air pressure to ensure the tightness.
10).widely used in refrigeration industry, cold room and other cooling system.

11)we can supply products as per customized samples or drawing

12)producing procedure: tube bending, punching fin, expanding, digressing, drying, welding, leakage test, bending, inspection, packing

HOWHeat transferWORK?

Heat transfer occurs when there is a difference in temperature between two mediums.Heat will travel from the

hot source to the cold source.

The rate at which the heat transfer occurs at is determined by many factors such as the heat conductivity

of thetwo materials andthe difference in temperatures of the two mediums.

Convectiuve heat transfer occurs when the materials are moving against each other.

Plate heat exchangers have significantly good heat transfer rates because they use metal plates which

have high heat conductivity rates and theplates are extremely thin.

The plate heat exchangers also achieve highamounts of heat transfer through convective forces with both

working fluids.

With large temperature differentials, great amounts of heat transfer can be achieved using a plate heat exchanger.

Why are us ?

1. We have technicians to research, manufacture and develop AUTO AC

Parts to assure the quality.

2. We engineer custom heat exchangers to meet OEM’s exact specifications, while also offering

many standard heat exchangers to meet the needs of end users as well as for prototyping purposes

3.Our heat exchangers are used in many industries including military and aerospace, medical equipment, lasers,

analytical instrumentation, power electronics, semiconductor equipment, machine tools, telecommunications, and more..