brass pipe,valve used horizontal casting machine

1 brass fittings continuous producing line, 2 horizontal casting, 3 gravity casting machine equipped, 4 machining equipment need - details see: https://www.machineto.com/brass-pipe-valve-used-horizontal-casting-machine-10161131
Condition:NewPlace of Origin:Guangdong China (Mainland)Brand Name:FanshunModel Number:GYT-120
After-sales Service Provided:Engineers available to service machinery overseasUsage:brass/copper casting machineWorking condition:continuous horizontal castingVoltage:380v/50hz
Power:low power requirementFinished products:brass rod,pipe,valves, extinguisher brass partsModel:GYT-120Furnace type:cored induction furnace
brass pipe,valve used horizontal casting machine
contact supplier for brass pipe,valve used horizontal casting machine


Introduction and structure

Melting furnace and holding furnace are tied together. No smoke furnace itself while melting. Auto constant temp control unit is available. Widely used in the field of brass, copper alloy products.

Both furnace connect through bottom, raw material melted down, liquid can be flowed to holding furnace chamber after component of liquid met special requirement. We this design structure can reduce smoke, loss of zinc because of oxidizing. Energy consumption is less.

The 120kw, 75kw main frequency cored induction furnace is composed by furnace body, inductor, cabinet, the inductor is installed under furnace body, include iron core, copper loop, coil, water jacket and so on.

1 120kw melting furnace + 75kw holding furnace

Specification: Specification:

Model: 500 Model: 500

Power: 120kw Power: 75kw

Rated voltage: 380v Rated voltage: 380v

Melting rate: 500kg/h Output stream: 2 (one direction, 6ton/day)

Working frequency: 50hz the other 2 outlet is considered

Capacity: 1.6ton working frequency: 50hz

Inductor: U type, single coil capacity: 2.5ton

Quantity: 1 set inductor: U type, single coil

quantity: 1 set

Introduction and structure

The casting machine is composed by pedestal ,electronic motor, speed reducer, gears, pulling roller, screw down device, speed control system.

2 Die casting machine

Specification:

Model: SYO-70

Speed: 0-0.035m/s

Casting diameter: 5-70mm

Quantity: 2 set

Introduction and structure

This cutting machine is suitable for fix length cutting(rod, pipe). It is made up of pneumatic system. Automatic cutting and unloading is available.

The saw is welded with hard alloy, can bear high temp. The saw can move along the guide rail.

After finish cutting, the saw will be pushed back by air cylinder.

3 Pneumatic cutting machine

Specification:

Model: Q70

Cutting size: Φ5-70mm

Speed: 10s/pcs

Power: 3kw

Working frequency: 50hz

Driver: pneumatic unit

Air pressure: 0-1 Mpa

Quantity: 2 set

brass pipe,valve used horizontal casting machine
Packaging Detail:Wooden pallet packaged
Delivery Detail:Within 45 days after T/T or L/C

Related Product for brass pipe,valve used horizontal casting machine