Blacksmith forging hammer(C41-150)

Detailed Product Description

This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, etc.

Features:

+ Ready operation: economic and convenient

+ Easy to operate,by manipulating the hand lever or foot-pedal,all operating functions----idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.

+ A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.

C41 series pneumatic forging hammers don't need any additional compressor or any other machine to start the hammer, customers just need to build the foundation according to the foundation drawing which we will send to customers after place order.

Model		C41-150	C41-250	C41-400	C41-560	C41-750	C41-1000	C41-2000
Weight of falling parts (kg) )		150	250	400	560	750	1000	2000
Maximum single hit energy(kj)		2.5	5.6	9.5	13.7	19	27	54
Hit number(min-1)		180	140	120	115	105	95	80
Distance between top and bottom die (mm)		370	450	530	600	670	800	1000
Distance from center of die to frame (mm)		350	420	520	550	750	770	950
Dimension of top die surface(L x W) (mm)		200x85	220x100	250x120	300x140	330x160	365x180	400x300
Dimension of bottom die surface(L x W) (mm)		200x85	220x100	250x120	300x140	330x160	365x180	400x300
Forges	Square(mmxmm)	130x130	145x145	220x220	270x270	270x270	290x290	350x350
	Round(mm)	Φ145	Φ175	Φ240	Φ280	Φ300	Φ320	Φ400
Motor	Type	Y180M-4-B3	Y180L-4-B3	Y200L-4-B3	Y280S-6-B3	Y280M-6-B3	Y315S-6-B3	Y315L2-6-B3
	Power(kw)	18.5	22	30	45	55	75	132
Weight	Hammer(kg)	3260	5000	8000	9800	17000	20000	48000
	Anvil block(kg)	1500	2500	4800	6720	9000	13000	24000
Outside Size		2390x 1085x 2150	2639x 1155x 2540	2785x 1400x 2884	3464x 1500x 3157	3905x 1370x 3175	4125x 1500x 3770	4200x 2300x 4390